background image

MANUFACTURER’S WARRANTY

This Housewatch product is guaranteed for a period of 2 (Two) years from date
of purchase, provided the product has been installed in accordance with this
instruction manual and local electrical wiring regulations and codes of practice.

This guarantee shall become invalid if this product has been incorrectly
installed, misused, tampered with or accidentally damaged.

If the goods are defective, we undertake to repair or replace the goods or any
part of them that is defective; or provide again or rectify any services or part of
them that are defective; or wholly or partly recompense you if they are defective.

This guarantee is in addition to other rights and remedies available to
consumers, all of which are given by us to you if you are a consumer. Our
Goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure. If
you wish to make a warranty claim, please return this product to the original
place of purchase together with your purchase receipt, or contact us using the
below details.

Proudly Distributed by

Repelec (Aust) 
Locked Bag 45
Plumpton NSW 2761
Ph: 1300 555 586  Fax: 1300 666 066
Email: [email protected]

20 & 40W sensor lights instructions_A6_Oct18.qxp_Layout 1  7/11/18  9:19 am  Page 16

Summary of Contents for 55-240

















Reviews: