Houseper GMB-HAR-PL1-M02, User Manual, Page: 3 / 8

Functionality (Clusters)
 (input 0x0000) Basic
 (input 0x0006) On/Off

(input 0x0702) Consumption metering
 (input 0x0003) Identify
 (input 0x0004) Groups
 (input 0x0005) Scenes
Control

By pressing the button once, the power supply to the consumer is toggled.
 If the device is connected to a ZigBee network, use the capabilities of the corresponding
system to monitor and control the device remotely.

If the plug is bound with another ZigBee device (eg Button) follow its instructions. Most
often, the command is sent by a single press.
Indicators
The device has two light indicators:
Orange – to indicate the line is powered.
Blue – for backlight (line off) and configuration status indication:

FAST blinking (4 times/second) – when executing a command.
 SLOW blinking (once/second) – when entering a command or returning
the result of a command.
In case of an invalid command or configuration error, the blue LED will blink
SLOWLY as follows:
 1 – wrong command.

2 – the device is not part of a ZigBee network. The command could not be
executed.
 3 – the device is locked. The configuration command could not be
executed.

4 – the device is part of a ZigBee network. The command could not be
executed.

5 – wrong PIN/PUK code. The command will not be executed.