●
Unplug the heater from the mains supply before cleaning.
●
Ensure that the heater has been allowed to cool down completely before
cleaning.
●
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and
dirt.
●
Use a vacuum cleaner to remove dust and fluff from around the grilles.
●
Ensure the heater is dry before plugging back into the mains supply.
6.Warning
：
6.1. The heater must be fixed correctly onto the wall or put the heater in the correct
position.
6.2. The heater is to be installed so that the controls cannot be touched by a person
using a bath or shower.
6.3. The heater is to be installed so that it is not located directly under a socket
outlet.
6.4. When the heater is working as it is in free standing mode with the foot set,
please do not use it in the vicinity of bath, shower, or swimming pool.
6.5. When the heater is working as it is in wall mounted mode, do not touch
the control unit when using it in the vicinity of bath, shower or swimming
pool.
6.6. Consult a qualified electrician or service technician if the power cord is
damaged.
6.7. DO NOT cover the heater when it is working.
6.8. Always store the heater when not in use.
6.9. Make sure the heater has cooled down before store it away.
7. Service
When you require service, contact your local dealer.
Replacement of supply cord”
The supply cord damaged must be replaced by a service agent or equivalent
qualified person in order to prevent a hazard.
8. Storage:
If you do not plan to use the heater for extended periods of time, it is recommended
that the heater is cleaned and then stored (preferably in its original packaging) in a
cool dry place.
Summary of Contents for ND20-15D
Page 7: ......
