After you have set the first day, you can press
“4/OK” for 3 seconds to copy and
save the data to the following days. Or after you have set the first day and confirm,
you can press
“4/OK” for 3 seconds within 12 seconds to copy the data to the
following days. Please notice that the data could only copy for the following days,
(eg, when you are setting the Wednesday running time and press
“4/OK” for 3
seconds, the Thursday to Sunday would be in the same running time, but Monday
and Tuesday could not copy the data.)
After you have set the first day, it can go onto the following day setting; you can set
the different running time according to the method
②
④、
After setting the running program
: Press
“
4/OK
”
to save and the heater will
operate in accordance to those on and off times. If not in the running time, the
device will turn off after 10 seconds.
3.3.3 Mec
hanical “M” mode timer setting
(the timer just for the current day)
Press “2/M-A” select the mechanical mode, LCD display “M”, then press “3/SET” to
set the timer, “17/HOUR” will flash, press :”6/+” or “5/-” to adjust the hour, then
press
“3/SET” again to set the minute. Press “4/OK” to confirm the
timer.”16/CLOCK SYMBOL” will light up, if you press “3/SET” when setting the
minute that means this will cancel the timer setting. When the setting time is less
than the current time, the timer will not work.
3.4 Turn off
Press “1/POWER BUTTON”
3.5 Negative ion function
This model excludes negative ion function, but the
“ION SYMBOL” “13” will display
on the screen (factory setting), you can press
“7/HIGH-LOW BUTTON” for 3
seconds to turn off the display.
3.6 High /low power select
Press “7/HIGH-LOW BUTTON” to choose high/low power, when choose high
power,”12/HI” will light up, while “11/LO” will be off. When you choose low
power,”11/LO” will light up, while “12/HI” will be off.
3.7 Mechanical mode and automatic mode select
Press “2/M-A” could select the mechanical or automatic mode.
When mechanical mode is selected M will display and A when in automatic mode.
3.8 The memory function after shutting down by hand
Whatever is on, after being turned off, or turned off for timing over, the setting
program is the one set last.
3.9 The memory function after shutting down suddenly
Whatever power applied after no electric or improperly shutdown, the device will
start to work automatically on the last setting. The timer would be the rest time from
shutdown.
3.10 Press sounds
There is a sound of buzzer with both each valid key-press and continuous key.
3.11 Electronic locking
When the device power is on, press button
“
6/+
”
and
“
5/-
”
at the same time for
3 seconds, all the control function are now locked and will be displayed on
“
19/TEMP
” as a square for 5 seconds, and then change to real temperature
display. If press any button, the display square for 5 seconds, no buzz sound, then
change to the real temperature display.
Methods to unlock:
①
No electric supply to the device
②
Timer over
③
press
“
6/+
”
and
“
5/-
”
at the same time for 3 seconds,
4. Safety feature
The unit is equipped with a high limit switch and the heater will automatically shut
off if it is in an over-heating condition.
The heater will automatically come back on when it has cooled down.
5. User tips
CLEANING INSTRUCTIONS: Always ensure the heater is clean behind. Press
down the two top catches “P” (please refer to the diagram below) on the back of the
heater to pull the heater forwards. After cleaning the heater you must return to the
fixed in the normal position.
The heater requires regular cleaning to ensure trouble free operation:
Summary of Contents for ND20-15D
Page 7: ......
