Sensor selection
Room temp
Calibration
Floor temp
Calibration
LI - Floor temp
limit
Schedule slection
Used for heating
or cooling
Adaptive function
Located in home
or office
Reset to factory
settings
1.
2.
3.
4.
5.
6.
7.
8.
9.
PROGRAMMING:
Default setting
00: Floor sensor
0.0 C
0.0 C
35.0C
01: 5+1+1
00: Heating
01: No
00: Home
00: No
Other programming Options
calibrate the temp detected by room sensor
-5.0C--5.0C
calibrate the temp detected by floor sensor
20.0C--50.0C
if you choose both sensors, floor temp limit must be set to protect floor
00: 07 (Different settings for each day of the week)
01: 5+1+1 (5days from Mon to Fri have the same events, Sat and Sun can be set
differently.)
00: Heating
01:Cooling
heating or cooling
00: Adaptive- after several days of installation and use, Adaptive function
ensures that the required temp has already been reached when the next event
begins
01: No
Located in the home or office:
00: Home
01: Office
00: No
01: Reset- all parameters are restored to default settings
There are 5 options:
00 Floor sensor: run by floor sensor (default and reccomended).
01 Room-in sensor: run by built-in room sensor.
02 Room-in sensor and floor sensor: run by built-in sensor with floor temp limit.
03 Room-out sensor: run by external room sensor.
04 Room-out sensor and floor sensor: run by external room sensor with floor temp limit.
-5.0C--5.0C
12
