Diagram One
4. Alternatively simply run a power cable through the
holes. Ensure this cable is not live.
Masonry Wall:
Drill a 14mm hole through to the cavity and fix the plastic hollow
sheath in the hole using epoxy resin or suitable builders
adhesive. The thread of the sheath should be flush with the
outside of the cladding or gyprock. If there is no cavity available
it is possible to chase the cable to the nearest power supply.
Wiring Instructions:
Green/yellow: Earth.
Blue: Neutral
Brown: Phase (power)
All electrical connections and terminations must be conducted by
a licensed A Class Electrician.
This appliance is rated for voltage 200v-240v.
This appliance must be connected to the house earth.
IP rating is IP55.
Warranty:
Hotwire HTRs carry a 2-Year Manufacturers Warranty from
the date of installation. You must register your HTR purchase
information and installation with distributors.
Installations must comply with THCI Terms of Trade, Warranty
Policy, Installation Instructions and Claim process. All related
documents and warranty forms (*) are available on line.
www.theheatingcompany.co.nz
Compliance:
This product is manufactured to International
Standards: IEC335-1: 1991
IEC60335-2-43: 1995
AS/NZS 3350.1: 2002
New Zealand & International Enquiries
The Heating Company International
Australia
Hotwire Heating
www.hotwireheating.com.au
