Hottek HT-973-202, User Manual, Page: 13 / 24

ENG
13
• After the water has boiled, the appliance will automatically switch to keep
warm mode, and the boiling indicator (1) will turn off and the keep warm
indicator (2) will light up.
• Unplug the appliance from the mains if you don't plan to use it, and also
before you remove the appliance for long-term storage and before cleaning.
Attention!
The appliance is equipped with an overheat protection system. If there is no or
little water in the appliance, it will automatically turn off.
Reboiling
• The water heating temperature is below the boiling point. If necessary,
the appliance allows you to bring the water to a boil.
• When you press the reboil button (3), the water will be reboiled.
Removing and installing the lid of appliance
• When refilling water or cleaning the appliance, the top lid can be
removed. To do this, press the key on the back of the lid (14) and pull
the lid up.
• To replace the lid, insert the metal rod of the lid into the slots of the
button and lock the lid.
3 ways of water dispense
There are 3 ways of dispensing water into the cup:
1) When the power is off, press the mechanical water dispense button (6).
2) Press the automatic water dispense button (4).
3) Press the water dispense ON-button (15) from the bottom of the cup.
Cleaning and Maintenance
• Before cleaning, unplug the appliance and allow it to cool completely.
• Drain through the neck. It is necessary to remove the lid of the
appliance pressing button (14) (see section Removing and installing
the lid of appliance).
• Wipe the appliance body with a soft, slightly damp cloth without
abrasive substances.
• Do not use metal washcloths, brushes or organic solvents to clean the
appliance.
• Regularly clean the appliance from scale with special tools that can be
purchased in retail chains. When using cleaning products, follow the
instructions on their packaging.