ENG
13
Caution!
If container is not properly mounted on appliance’s body, blocking switch will
react and appliance won’t turn on.
Caution!
Do not turn on blender with empty container.
Caution!
Operate the motor for a maximum of 3 minute or alternating 3 minute on, then
3 minute off to prevent overheating or consequent damage.
• Put blender on flat dry surface.
• •Before starting work, make sure that the switch is on «OFF» and plug is
not in the socket.
• Cut ingredients on small pieces.
• Note: If it is necessary to cut big fruits or vegetables, they should be sliced
into pieces no more than 2,5 cm first. Usually certain amount of purified
water has to be added to facilitate the smooth running of appliance. The
amount of mixture should not exceed the max level as indicated on the jar.
The best proportion of the fruit and water is 2:3.
• Place sliced ingredients into container, no more than maximal level allows.
Close the lid. Put the plug into the socket.
• Move the switch into mode 1..5 (for uniform mixing in endless work mode),
or use impulse work mode (mixing with short interruptions).
Work modes:
«P» - impulse mode;
«OFF» - switching off.
The rotation speed range is from "1" to "5", where:
«1» - slow rotation spin;
«5» – fast rotation spin.
• To turn the appliance off, move the switch to «OFF».
• For work in impulse mode, move the switch to «P», and hold it like that for a
few seconds. If you release the switch, it will return to «OFF» automatically.
To achieve the intended result, retry impulse mode.
• For additional load of ingredients, use loading hole in the lid of container.
• To remove the container after the end of work, turn it counter-clockwise.
• For ease of storage, keep power cable in the designated area of body.
Caution!
Food must be placed into the container for cutting/mixing while device is turned off.
Summary of Contents for HT-969-100
Page 23: ...KAZ 23 ...