Hotsy EP • 8.914-444.0 • Rev. 10/17
OPERATOR’S MANUAL
PRESSURE WASHER
6
COMPONENT IDENTIFICATION
Pump
— Develops high pressure.
Spray Gun
— Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Wand
— Must be connected to the spray gun.
Unloader
— Safety device that relieves pressure when
spray gun trigger is closed.
High Pressure Hose
— Connect one end to water
pump discharge nipple and the other end to spray gun.
Pump Protector
— Cycles fresh cool water through
pump when recirculating water reaches 140°F.
GFCI
— Ground fault circuit interrupter trips when
voltage leaks to ground.
Note
:
If trigger on spray gun is released for more
than 1-2 minutes, water will leak from valve. Warm
water will discharge from pump protector onto
floor. This system prevents internal pump damage.
Spray Gun
and Wand
High Pressure
Hose
Pump
Pressure
Nozzle
Garden Hose
(not included)
Unloader
Detergent
Bucket (not
included)
Water Supply
(not included)
Wand
Hanger
Quick
Coupler
On/Off
Switch
GFCI
Pump
Protector
Soap
Nozzle
Safety
Latch
