manualshive.com logo in svg

Hotsy 1260SS, Operator'S Manual

Share
Download
Hotsy 1260SS Operator'S Manual Download Page 19

19

Operations

Storage 

DANGER: Do not store flammable liquids (gasoline, 
solvents, etc.) near pressure washer, or in non-
ventilated areas.

DANGER: Ne pas entreposer de liquides inflamma-
bles (essence, mazout, pétrole, solvants, etc.) à 
proximité de la laveuse à pression ou dans des 
endroits non ventilés.

Protect from freezing by storing in a heated area, or by 
flushing the system with antifreeze. To flush the 
system, fill the float tank with antifreeze and remove 
spray nozzle from wand. Start the machine and allow it 
to run until antifreeze flows from the end of the wand. 
Place end of wand into float tank and circulate the anti-
freeze through system for several minutes. Open and 
close the trigger gun several times to circulate anti-
freeze through the unloader valve. Place detergent line 
into the float tank. Open the detergent metering valve to 
draw antifreeze into the detergent system.

If the pressure washer is not to be used for a consider-
able length of time, it is recommended to flush the 
system with antifreeze for rust protection.

Hotsy 1200 Operator’s Manual  8.914-366.0 - AL

Summary of Contents for 1260SS





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands