background image

3

CONTENTS

Model Number ______________________________

Serial Number ______________________________

Date of Purchase ___________________________

The model and serial numbers will be found on a decal attached 
to the pressure washer. You should record both serial number and 
date of purchase and keep in a safe place for future reference.

PCA • 8.917-985.0 • Rev. 10/12

Important Safety Information ................................................................ 4-6

Component Identifi cation ......................................................................... 7

Assembly Instructions .............................................................................. 8

Operating Instructions......................................................................... 9-10

Detergent and General Operating Techniques ...................................... 11

Shut Down and Clean-Up ...................................................................... 12

Storage .................................................................................................. 12

Troubleshooting ................................................................................ 13-14

Preventive Maintenance ........................................................................ 15

Hose and Spray Gun Assembly and Parts list ....................................... 16

Oil Change Record ................................................................................ 17

Warranty ................................................................................................ 18

Summary of Contents for 1.107-124.0



















Reviews: