Features & Settings
Output Level:
The ACE system cleans the water throughout the day. The output setting of 0 -10 de-
termines how long the cell runs each day. Observe your usage patterns and measure
the chlorine level before each use to guide your output setting. Adjust output up or
down to increase or decrease output. Keep your setting as low as possible to main-
tain 1-5 pm chlorine. Use Boost or add Freshwater Concentrated Chlorine Granules
for occasional high use situations.
Output Settings
0
No output/System off
1
Vacation/low output mode
2-7
Normal use settings (recommended)
8-9
High use settings
10
Maximum system output, equal to Boost (system runs constantly)
Turning the ACE System off
By setting Output to 0, the system will stop generating sanitizers. You will need to
manually maintain the sanitizer level using FreshWater Concentrated Chlorinated
Granules if the ACE system is off.
Vacation or limited use
When the spa is not going to be in use, shock the spa by increasing chlorine to 3-5
ppm and then run the automatic clean cycle. Clean or replace filters. Lower Output to
2. For extended vacations, lower Output to 1 for low output mode.
Boost:
The Boost feature temporarily increases the output setting to the maximum level for
24 hours. The system returns to the previous output setting once the Boost cycle is
over. Use the Boost function to gradually increase the chlorine level prior to a high
use situation, or anytime the chlorine level is below 1-5 ppm.
A Boost will have a greater impact when the output setting is set to a low level, and
less of an impact when the output setting is high. Freshwater Concentrated Chlorine
Granules can be added to create an immediate chlorine residual to remove bather
load and assist the ACE system in building a sanitizer residual.
To increase the chlorine level:
1. In the ACE Menu, press the
ON
▲
button to enter the BOOST menu.
2. Press the
OFF
▼
button twice to select and confirm the boost. The BOOST
icon will flash to indicate that the setting has been updated. The system
will automatically initiate a salt test before the boost cycle. Once the test is
complete (up to 20 seconds) the bOOST screen will flash to indicate that the
system is boosting.
Page 6
ACE Salt Water Sanitizing System
Summary of Contents for LIMELIGHT COLLECTION Ace
Page 1: ...L I M E L I G H T C O L L E C T I O N A C E O W N E R S M A N U A L...
Page 18: ......
Page 19: ......
