Page 15
Operating Instructions
SPA LOCK
When activated, the Spa Lock feature
disables all functions on the control
panel. It prevents others from tampering
with the jets, lights and temperature
settings on your spa. The control panel
will not respond to any hard or soft
buttons when pushed in Spa Lock
mode.
To activate the Spa Lock:
• Press the OPTIONS hard button.
• Press the soft button next to
Set-up
.
• Press the soft button next to
Spa Lock Off
.
IMPORTANT:
The Temperature/Spa Lock icon will be displayed while
the screens are locked.
To deactivate the Spa Lock:
• Press and hold the OPTIONS hard button and the LIGHTS hard button
at the same time for 3 seconds. The spa lock icon will turn off.
IMPORTANT:
You can activate the spa lock feature even when
the temperature lock is already on. You do not need to turn off the
temperature lock in order to turn on the spa lock feature. If the
temperature lock was already on when you activate the spa lock, it will
remain on when you turn off the spa lock.
JETS CONTROL
The JETS hard button activates the jet
pumps. When the JETS hard button is
pressed, the jets menu will be displayed
on the control panel with Jet 1 in the
Low position, the Jet Pump icon will
also display on the home screen. Press
any of the soft keys to change the jet
functions between high or low (when
available) speed, and off.
The
GLEAM model
has 3 jet pumps, Jet 3 can be found in the lower
right corner for
GLEAM
spas only. The third jet pump can only be
activated by pressing the soft key next to Jet 3.
The jets icon (on the Home Screen) will remain lit until the button is
pressed to turn off the jet pump(s), or after two hours of continuous
operation when the pump(s) is automatically shut off by the control
system.
The jet pump(s) will turn themselves off after two hours of continuous operation
to prevent overheating and conserve energy in case you forgot they were on.
The jets can be restarted again with no delay.
IMPORTANT:
The jet pumps will not function while the spa lock feature
is activated.
You may also run through the entire jet pump cycle by only using the
JETS hard button as follows:
GLEAM , PULSE/DL, FLAIR & GLOW
1st Press = Jet pump 1 on Low 2nd Press = Jet pump 1 on High
3rd Press = Both jet pumps on
high speed
4th Press = Jet pump 1 on
Low, Jet pump 2 on high
5th Press = Jet pump 2 on High 6th Press = All pumps off
BOLT
1st press = jet pump on High
2nd press = jet pump OFF
LIGHT CONTROL
All
HOT SPRING
spas are equipped with Multi-Color lighting.
Press the LIGHTS hard button to activate the Interior Lights and display
the screen.
To change the intensity of the spa’s Interior lights:
• Press the soft button next to
Dimmer
.
There are three (3) brightness levels
plus off.
IMPORTANT:
Pressing the LIGHTS
hard button several times will also
change the intensity of the spa's
Interior lights when in the Interior
Lights screen from brightest to off,
back to brightest.
To change the color of the Interior lights:
• Press the soft button next to
Color
.
The colors are as follows: 1) Blue, 2) Aqua, 3) Green, 4) White, 5)
Yellow, 6) Red, 7) Magenta, 8) Color Wheel On, 9) Color Wheel Off.
NOTE:
Lights icon on the Home Screen will flash whenever the Color
Wheel is on.
To turn off all of the lights:
• Press the soft button next to
Lights Off
.
GLEAM
Spa Only:
The Gleam spa has exterior lights.
IMPORTANT:
Pressing the LIGHTS hard button will turn on both the
Interior and Exterior lights. Pressing the hard light button a second time
will dim interior to 2, press hard light
button a third time will dim interior to 1,
press hard light button a fourth time will
dim interior to off, press the hard light
button a fifth time will shut all lights off.
• Press the soft button next to
Exterior
Lighs
to view the Exterior Lights
screen.
• Press the soft button next to
Daily Lights
to turn on the 24 hour
external light time. Activating the timer will turn external lights on for 6
hours at the same time every day.
• Press the soft button next to
Daily
Lights
a second time to turn the timer
Off
• Press the soft button next to
Interior
Lights
to return to the Interior Lights
menu.
SUMMER TIMER
Your
HOT SPRING
spa is equipped with a summer timer. The summer
timer can be activated during extremely hot summer months to
maintain water temperatures. Activating the summer timer causes the
heater to immediately shut down. The circulation pump will remain
on for approximately 5 minutes pushing water through the heater to
cool it down. Both heater and circulation pump will then remain off for
eight hours. The summer time icon will be displayed on the Control
