Page 5
Getting Started
MOTO-MASSAGE DX
JET
The
MOTO-MASSAGE DX
jet automatically travels up and down in a
sweeping motion, simulating the natural stroking effects of a manual
massage. The intensity of the
MOTO-MASSAGE DX
jet may be adjusted
by turning the
COMFORT CONTROL
lever.
The
MOTO-MASSAGE DX
jet has been factory adjusted to provide
maximum hydromassage, and to achieve full vertical travel with its
COMFORT CONTROL
lever in the full air volume position. Should
the
MOTO-MASSAGE DX
jet not achieve full vertical travel and the
problem is not a closed air control valve or clogged filter cartridge, then
your
HOT SPRING
Service Center should be contacted.
IMPORTANT:
A slow or non-moving
MOTO-MASSAGE DX
jet may
indicate that the filter cartridge pores are obstructed with dirt, body oils,
or calcification. Follow the filter cartridge cleaning procedures in the
Spa Care and Maintenance section of this manual.
HYDROMASSAGE JETS
The Hydromassage jets have two different nozzle options: directional
and dual port rotary. The directional nozzle allows you to aim the water
in the direction that feels best. The dual port rotary nozzle divides the
water flow into two streams, and then spins.
Turn the faceplate to increase and decrease the jet pressure.
ACCESSORY NOTE:
Your
HOT SPRING
dealer stocks hydromassage
jet kits which can easily be installed in your spa to modify your jets from
directional to dual port rotary.
SOOTHINGSTREAM
JET
The
SOOTHINGSTREAM
jet is another unique feature of
HOT
SPRING
spas. Its seven outlets are designed to massage the muscles
in the upper back and shoulders, gently and thoroughly. Turn the
faceplate clockwise to increase the jet pressure and counterclockwise
to decrease the jet pressure. Turn the faceplate to increase and
decrease the jet pressure.
PRECISION
DIRECTIONAL OR ROTARY JETS
PRECISION
jets are located above
MOTO-MASSAGE DX
jets and in
groups of various sizes. They are designed to perform a soft, soothing
massage on your back and shoulders. Adjust the pressure of the
PRECISION
jets using the
COMFORT CONTROL
lever (located closest
to the
PRECISION
jets).
Refer to the drawings on the following pages to familiarize yourself
with the
SMARTJET
system menus for your spa. Please note that the
SMARTJET
lever side of the spa is always considered the front when
referring to the locations of the different types of jets and jet systems.
The clock positions are correct when facing the spa, standing at
the SMARTJET lever.
FOOTSTREAM
JET
The
FOOTSTREAM
jet is a large orifice hydromassage jet designed to
put maximum massaging action on a specific area of the body. It is located
in the lower part of the spa to afford optimal access for the massaging
of feet, legs, hips, and lower back. The intensity of the
FOOTSTREAM
jets can be altered (except the ones found in the FootWell
™
system)
using the
COMFORT CONTROL
lever.
FOOTSTREAM
jets located in
the
FOOTWELL
are not adjustable. Turn the faceplate to increase and
decrease the jet pressure.
HYDROSTREAM
JET
The
Hydrostream
jet is a mid-size hydromassage jet that delivers a great
massage to the feet, back and shoulder areas. Turn the faceplate to
increase and decrease the jet pressure.
WATER FEATURE
GRANDEE
,
ENVOY, VANGUARD, ARIA
&
SOVEREIGN
spas are
equipped with a
BELLAFONTANA
water feature. This water feature can
be turned on or off when the two-speed pump is on low speed (tranquil
mode) or high speed. To function correctly, the water feature on/off lever
must be placed in the
full on
position only.
If the lever is not in the
full
on position when the pump is on high
speed, it is likely that the water feature will project water substantially
farther out into the spa as the on/off lever is opened. This is not proper
operation. If this occurs, the pump should be turned off, the water
feature lever rotated to the full on position and the pump turned on again.
CAUTION:
Partial blockage of water flow at entrance of water feature
will cause the water to flow farther into or over the spa.
HOT SPRING
LOGO LIGHT
The
HOT SPRING
logo on the front of the spa illuminates several
colors. These colors indicate the power, water temp ready and status of
the spa without having to open the cover to look at the control panel.
Ready Indicator:
The GREEN indicator will light when the spa water
temperature is within 1°C (2°F) of the set temperature, and will turn
off when the temperature is outside of that range. If you increase or
decrease the temperature setting of the spa, the ready indicator will
turn off until the water temperature reaches the acceptable range
for the new temperature setting. A flashing RED indicator means a
problem may exists with the temperature sensor (see Logo Light
Troubleshooting section for more information).
Power Indicator:
The BLUE indicator is ‘on’ when the spa is properly
supplied with power. It also provides a diagnostic function–a flashing
RED indicator indicates that the heater high limit has tripped, meaning
that either the spa water is above its acceptable temperature range, or
a malfunction has occurred within the spa (such as low circulation due
to clogged filters). An ‘off’ BLUE indicator means that there is a problem
with the spa control box or the power supplied to the spa (see Logo Light
Troubleshooting section for more information).
Status Indicator:
A GREEN indicator is on when spa functions are
working normally. A YELLOW indicator is on when a spa function
requires attention. A RED indicator is on and flashing when there is an
issue with the spa functions and needs immediate attention (see Logo
Light Troubleshooting section for more information).
QUICK START-UP INSTRUCTIONS
BEFORE YOU FILL YOUR SPA
Make sure your spa has been properly installed per all local codes, this
includes the location of the spa, the foundation of the spa as well as the
electrical installation of the spa. Please see the Installation Instructions
section of this manual.
Ready indicator - water is ready, within
1°C of set temperature when green
Power indicator - Power to spa is on when blue
Status indicator - all spa
functions are working
properly when green
See Logo Light Trouble
shooting guide for more
color information
