background image

Page 14

Page 14

TEMPERATURE CONTROL

Press the actual temperature on Home screen to 

display Set Temperature screen. 

The set temperature range is from 

80°F to 104°F (26°C  to 40°C). 

NOTE

: The water temperature 

may vary depending on the current 

use and condition of your spa and 

outside temperatures.

The factory set temperature of the spa water is 100°F (38°C).
 The last temperature value set by the user will be stored in memory. If 

power is disconnected from the spa, it will automatically revert to the last 

set temperature when power is reapplied.

Press to raise set temperature of spa. Press and hold to 

raise the temperature continuously.
Press to lower set temperature of spa. Press and hold to 

lower the temperature continuously.

MEMORY SCREEN 

Press 

on Home screen to display Memory screen.

Press to activate the last saved set of operating 

functions.

Press to save the current set of operating 

functions (jets and lights only).

Press to return to home screen if neither of the 

above buttons are used. Screen will automatically 

revert back after 10 seconds of non activity.

CLEAN CYCLE SCREEN  

Press 

 on Home screen to display Clean Cycle screen.

 Press to start 

the manual Clean Cycle. The 

screen will briefly display CLEAN 

CYCLE: ACTIVE. Activates jet 

pump 1 on high speed for a ten 

minute period.

                 

Press & hold to activate and deactivate the Auto 

Clean Cycle. If activated, a clean cycle will run 

every 24 hours starting at the time ON was first 

pressed (runs Jet 2 for 1 minute and Jet 1 for 9 

minutes).
Press to return to Home screen. Screen will 

automatically revert back after 10 seconds of non 

activity.

SETTINGS SCREENS 

Press

on Home screen to display first Settings Screen. 

The first Settings screen allows 

you to turn Temperature Lock, 

Spa Lock, and Summer Timer On 

or Off. 

TEMPERATURE LOCK

Press

on Home screen to display Temperature Lock. 

The Temperature Lock feature 

prevents changing the desired 

water temperature setting. All 

other control panel functions 

will operate normally while the 

Temperature Lock is "ON". 

  Press and hold ON or OFF for 

approximately 4 seconds

 to activate 

or deactivate.

SPA LOCK  

Press

on Home screen to display Spa Lock.

When activated, the Spa Lock 

feature disables all functions on 

the control panel. 
The control panel will not 

respond to anything except 

on the Home screen. 

Press and hold ON or OFF for 

approximately 4 seconds

 to activate 

or deactivate.

SUMMER TIMER

Press

on Home screen to display Summer Timer.

•  The Summer Timer can be 

activated during extremely hot 

summer months to help maintain 

set water temperatures. 
•  Activating the Summer Timer 

causes the heater to immediately 

shut down. The circulation pump 

will remain on for approximately 5 minutes pushing water through 

the heater to cool it down. 

•  Both heater and circulation pump will remain off for eight hours. 

The circulation pump and heater will automatically shut down 

for the same eight hours every day until the Summer Timer is 

deactivated. 

•  It is recommended to activate the Summer Timer in the morning so 

that the spa is off during the hottest part of the day and so that the 

circulation pump will start up again in the evening when you are 

ready to enjoy the spa. 

Press ON or OFF to activate or deactivate. 

Operating Instructions

Summary of Contents for Aria ARE

















































Reviews: