D-System Operating Instructions
Hotset GmbH
–
Hueckstraße 16
–
58511 Lüdenscheid, Germany
–
+49 2351 4302 0
–
–
–
04/2021 RS
49
Select the corresponding graphs using the selection fields.
Use the arrow key
to go back and view the selected graphs.
The display speed of the graphs can be set via the User system settings. This setting has no
influence on the analysis/data logging. Here all measurement data is always written with the set
interval.
For a synchronization of the measurement data with an e.g. injection molding cycle, the digital
input can be activated.
Temperature,
pressure and flow
axis
Digital input
Measuring
points
