background image

4

GB

Technical data

Model

WMFG 8537

Dimensions

width 59.5 cm

height 85 cm

depth 60.5 cm

Capacity

from 1 to 8 kg 

Electrical 

connections

please refer to the technical 

data plate fixed to the ma-

chine

Water con-

nections

maximum pressure 1 MPa 

(10 bar)

minimum pressure 0.05 

MPa (0.5 bar)

drum capacity 62 litres

Spin speed

up to 1500 rotations per 

minute

Test wash 

cycles in 

accordan-

ce with 

directives 

1061/2010 

and 

1015/201  

Programme 

Cotton Standard 60°.

Programme 

Cotton Standard 40

°

.

This appliance conforms to 

the following EC Directives:

- 2004/108/EC (Electroma-

gnetic Compatibility)

- 2006/95/EC (Low Voltage)

- 2012/19/EU

As the colours of the wires in the lead may 

not correspond with the coloured markings 

identifying the terminals in your plug, proceed 

as follows:

Connect Green & Yellow wire to terminal 

marked 

E

 or   or coloured Green or Green & 

Yellow.

Connect Brown wire to terminal marked 

L

 or 

coloured Red.

Connect Blue wire to terminal marked 

N

 or 

coloured Black.

If a 13 amp plug (BS 1363) is used it must be 

fitted with a 

13 amp fuse, either in the plug or adaptor or 

at the distribution board.

If you are in any doubt regarding the electrical 

supply to your machine, consult a qualified 

electrician before use.

How to connect an alternative plug:

The wires in this mains lead are coloured in 

accordance with the following code:

BLUE  

 

 

NEUTRAL (N)

BROWN 

 

 

LIVE (L)

GREEN & YELLOW 

EARTH (E)

Disposing of the appliance:

When disposing of the appliance please 

remove the plug by cutting the mains cable 

as close as possible to the plug body and 

dispose of it as described on the previous 

page.

!

 The washing machine should not be installed 

in an outdoor environment, not even where 

the area is sheltered, because it may be very 

dangerous to leave it exposed to damp, rain 

and thunderstorms.

!

 When the washing machine is installed, the 

mains socket must be within easy reach. 

!

 Do not use extensions or multiple sockets.

!

 The  power supply cable must never be bent 

or dangerously compressed.

!

 The power supply cable must only be 

replaced by an authorised serviceman.

Warning! The company denies all liability if and 

when these norms are not respected.

The first wash cycle

Once the appliance has been installed, and 

before you use it for the first time, run a wash 

cycle with detergent and no laundry, setting 

the 60°C programme.

GREEN &
YELLOW

BROWN

BLUE

13 ampere fuse

CROSS-BAR
CORD GRIP

Summary of Contents for WMFG 8537

















Reviews: