Hotpoint WLW5700B, Use And Care Manual

Page: 8 / 28

How tome the
Bleach Dispenser
. Use this dispenser with liquid
bleach only. If you prefer to use
powdered bleach, pour it into the
wash basket along with your
detergent. Do not put powdered
bleach into the bleach dispenser.
. Measure bleach carefully. Here
are some recommended amounts:
FULL WATER LEVEL—1%
(310 ml) liquid
LOW WATER LEVEL—2/3
(170 liquid
system–1/4 cup
(60
ml) liquid
●
Pour measured amount of liquid
bleach directly into bleach dispenser.
. Do not overfill or allow dispenser
to overflow.
Avoid splashing.
Undiluted bleach can cause fabric
damage.
. Never pour undiluted liquid
bleach directly onto clothes or
into the wash basket.
How to the
Fabric Softener
Dispenser
. Position the Fabric Softener
Dispenser on the agitator.
●
Pour manufacturer’s recommended
amount of fabric softener into a
standard measuring cup.
Add enough water to fill the cup
1/2 full.
Pour the diluted softener into the
dispenser.
. The fabric softener will
automatically be dispensed at the
proper time.
●
Do not stop the washer during
the first spin.
This will cause the
dispenser to empty too soon.
When using Fabric Softener
Dispenser with the
system, use one (1) teaspoon (5 ml)
of concentrated softener or one (1)
tablespoon (15 ml) of diluted
softener.
●
Do not use the Fabric Softener
Dispenser with the Soak Setting
or RAPID WASH Setting.
. If the rinse dispenser gets clogged,
soak it in a solution of 1 cup water
and 1 cup alcohol.
to Use the
setting
●
Select Fabric Care
and turn Cycle Selector to
“SOAK?’
. Be sure “Extra Rinse” control is
turned to
●
For a cold soak, set Options
control to “NORMAL?’ For a
warm soak, set Options control to
“WARM
●
If a hot soak is desired, select the
COTTONS COLOR FAST Fabric
Care Program and turn the Cycle
Selector Knob to “NORMAL
Start the washer. After
washer fills and begins to agitate,
push in the Cycle Selector Knob
and turn to
Pull out the
Cycle Selector Knob to complete
the cycle.
●
For an extended soak
allow the
washer to fill and agitate for a few
minutes to dissolve the soaking
agent. Then push in the Cycle
Selector Knob to stop the washer
(keep lid closed) and allow to soak
for as long as desired.
desired
soak period, pull out the Cycle
Selector
to complete the cycle.
●
Do not use the Fabric Softener
Dispenser
with the Soak Setting.