background image

Safety Infor

mation

Operating Instr

uctions

Tr

oubleshooting T

ips

Customer Ser

vice

IMPORTANT SAFETY INSTRUCTIONS.
READ ALL INFORMATION BEFORE USING.

6

Use this appliance only for its intended purpose as
described in this Owner’s Manual.

■ 

Never reach into washer while 
it is moving. Wait until the
machine has completely
stopped before opening 
the lid.

Do not mix chlorine bleach
with ammonia or acids such 
as vinegar and/or rust
remover. Mixing different
chemicals can produce a toxic
gas which may cause death.

■ 

Do not wash or dry articles
that have been cleaned in,
washed in, soaked in, or
spotted with combustible or
explosive substances (such as
wax, oil, paint, gasoline,
degreasers, dry-cleaning
solvents, kerosene, etc.)
which may ignite or explode.
Do not add these substances
to the wash water. Do not use
or place these substances
around your washer or dryer 
during operation.

■ 

The laundry process can
reduce the flame retardancy
of fabrics. To avoid such a
result, carefully follow the
garment manufacturer’s 
wash and care instructions. 

■ 

To minimize the possibility 
of electric shock, unplug this
appliance from the power
supply or disconnect the
washer at the household
distribution panel by
removing the fuse or 
switching off the circuit
breaker before attempting 
any maintenance or cleaning.

NOTE:

Turning the Cycle

Selector knob to an off
position does 

NOT 

disconnect

the appliance from the 
power supply.

■ 

Never attempt to operate this
appliance if it is damaged,
malfunctioning, partially
disassembled, or has missing
or broken parts, including a
damaged cord or plug.

WHEN USING THE WASHER

WARNING! 

Summary of Contents for VLLR1020T





















Reviews: