Hotpoint VLLR1020T Owner'S Manual Download Page 17

Customer Ser

vice

Tr

oubleshooting T

ips

Operating Instr

uctions

Safety Infor

mation

Problem

Possible Causes

What To Do

Wrinkling

Improper sorting

Avoid mixing heavy items 

(like work clothes) with 

light items (like blouses).

Try a fabric softener.

Overloading or

Load your washer so

incorrect water level

clothes have enough room 

to move freely.

Incorrect wash and

Match Cycle selection to

dry cycles

the type of fabric you are 

washing (especially for easy 

care loads).

Repeated washing in

Wash in warm or cold water

water that is too hot

with plenty of detergent.

Too many suds

Type of detergent

Switch to a lower sudsing 

detergent brand and 

follow instructions on 

package.

Very soft water

Try less detergent.

Snags, holes, tears, rips

Pins, snaps, hooks, sharp

Fasten snaps, hooks,

or excessive wear

buttons, belt buckles

buttons, and zippers.

zippers, and sharp objects

Remove loose items like 

left in pockets

pins, objects in pockets

and sharp buttons.

Turn knits (which snag 

easily) inside out.

Undiluted chlorine bleach

Check bleach package 

instructions for proper 

amount.

Never add undiluted 

bleach to wash or allow 

clothes to come in contact 

with undiluted bleach.

Chemicals like hair bleach

Rinse items that may have

or dye, permanent wave

chemicals on them before

solution

washing.

17

Summary of Contents for VLLR1020T





















Reviews: