9
GB
Start and Programmes
n°
Programme
Max. load
Description of program
Cycle
duration*
1
Ready to
Wear
Max
Programme suitable for drying cotton garments ready to wear.
130’
2
Standard
Cotton
Max
Standard cotton programme, suitable to dry normally wet cotton laundry. Most efficient programme in terms of
energy consumption for drying cotton laundry. The values on the Energy Label are based on this programme.
120’
3
Cotton Iron
Dry
Max
Drying for cotton garments intended to make ironing easier, immediately after the end of the cycle.
90’
4
Shirts
3 kg
“This is a programme for Shirts made from cotton or cotton blend/synthetics.
“
75’
5
Anti
Allergy
Max
This cycle has the “Allergy UK” approval of “The British Allergy Foundation” attesting the effective reduction and
elimination of allergens. It can be used both with damp load (drying and treatment) and dry load (half load only).
170’
6
Synthetics
3 kg
For drying laundry made of synthetic fibres.
75’
7
Jeans
3 kg
For drying cotton jeans-wear and garments made of robust cotton, like denim, such as trousers and jackets.
100’
8
Wool
1 kg
Programme for drying wool clothing. It is advisable to turn the garments inside out before drying. Leave to dry
naturally the heaviest edges that are still damp.
60’
9
Silk
0.5 kg
Gentle drying of silk garments.
60’
10
Baby
Delicate
2 kg
A programme intended to dry garments and linen of new-born babies (cotton and chenille), as well as delicate
garments. Do not dry garments having plastic covering.
85’
*Note:
The duration of the program will depend on the size of the load, types of textiles, the spin speed used in your washer and any extra options selected.
Starting and selecting a programme
1.
Plug the dryer into the power supply socket.
2.
Select the programme according to the type of laundry
.
3.
Open the door, ensure that the filter is clean and securely
placed and that the water container is empty and correctly
slotted
(see Care and maintenance).
4.
Load the machine, making sure that no piece of laundry
gets between the door and the relative seal. Close the door.
5.
Press the ON/OFF button to start the machine.
6.
After consulting the programme chart and the indications
for each type of fabric, turn the Programme selection knob
towards the programme corresponding to the type of laund-
ry to be dried
(see Programmes and options).
!
Warning: If the position of the programme selection knob
changes after pressing the START/PAUSE button, the
selected programme will NOT be modified. To modify the
programme, press the START/PAUSE button to put the pro-
gramme in pause mode, then select a new programme and
the relative options. Press the START/PAUSE button to start
the new programme.
7.
If necessary, set the ‘time for the delayed start and any
other options
(see Programmes and options).
8.
Press the START/PAUSE button to start the drying cycle.
Laundry can be checked while the drying programme runs and
any garments already dry can be removed, while drying conti-
nues for the remaining items. After closing the door, press the
START/PAUSE button to resume machine operation.
9.
The final COOL TUMBLE phase (i.e. the fabrics are cooled)
activates during the last few minutes of the drying programme;
always allow this phase to terminate.
10.
When the
END
indicator light turns on, the programme has
ended. The buzzer will beep 3 times to let you know that your
programme is complete. Open the door, remove the laundry
then clean the filter and replace it. Empty the water container
and put it back in its slot
(see Care and maintenance).
If the “Crease Care” option was selected and laundry is not
removed immediately, the drum will rotate garments at intervals
for 10 hours or until the door is opened.
11.
Disconnect the dryer from the power supply.
Standby mode
This tumble dryer, in compliance with new energy saving re-
gulations, is fitted with an automatic standby system which is
enabled after about 30 minutes if no activity is detected. Press
and hold the ON/OFF button until the dryer reactivates.
