35 of 49
Service Manual UK
I
ndesit
C
ompan
y
English
FAULT CODES
1/4
FAULT
SUBCODE
DESCRIPTION
CHECKS
F01
01
Main PCB probe short circuited.
1
Unplug, wait for 2 minutes, plug
back in again and test the appli-
ance.
2
Replace the main PCB.
02
Main PCB probe circuit open.
11h
Rtn out of range
12h
Vline out of range
21h
No mains voltage / Master Relay Fans open
22h
Mains voltage present / Master Relay Fans
shortcircuited /(Fan triac short circuited).
51h
Floor heating element circuit: Triac open or
relay not closing
52h
Circular heating element circuit: Triac open
or relay not closing
54h
Steam heating element circuit: Triac open or
relay not closing
56h
Grill 1 heating element circuit: Triac open or
relay not closing
57h
Grill 2 top heating element circuit: Triac open
or relay not closing
58h
Divider heating element circuit: Triac open
or relay not closing
59h
Ceiling heating element circuit: Triac open
or relay not closing
61h
Floor heating element feedback failure
62h
Circular heating element feedback failure
63h
Steam heating element feedback failure
64h
Grill 1 heating element feedback failure
65h
Grill 2 heating element feedback failure
66h
Divider heating element feedback failure
67h
Ceiling heating element feedback failure
90h
DS / Divider circuit (analogue inputs) out
of range
F02
1
Visual Board probe short circuited.
1
Unplug, wait for 2 minutes, plug
back in again and test the appli-
ance.
2
Replace the Display PCB.
3
Replace the Main PCB.
2
Visual Board probe circuit open
21h
uP1 – uP2 communication
31h
Display keys
F03*
1
Visual board setting
1
Check the PTC probe in the main
cavity (lower) is working properly.
2
Check connectors on the board
and component sides.
3
Check the state of cables.
4
Replace the Main PCB.
01
Main oven probe short circuited.
02
Main oven probe circuit open.
* N.B: Open Space appliances only.
