background image

EN

3

HEATING THE OVEN

A new oven may release odours that have been left 

behind during manufacturing – this is completely 

normal.

Before starting to cook food, we therefore 

recommend heating the oven with it empty in order 

to remove any possible odours.

Remove any protective cardboard or transparent film 

from the oven and remove any accessories from inside 

it.

Heat the oven to 250 °C for about one hour, 

preferably using the “Forced air” function. The oven 

must be empty during this time.

Follow the instructions for setting the function 

correctly.

Please note: It is advisable to air the room after using the 

appliance for the first time

USING THE APPLIANCE FOR THE FIRST TIME

1.

 SELECT A FUNCTION

To select a function, turn the 

selection knob

 to the 

symbol for the function you require.

2.

 ACTIVATE A FUNCTION 

To start the function you have selected, turn the 

thermostat knob

 to set the temperature you require. 

To end an active function at any time, turn the 

selection knob

 and the 

thermostat knob

 to the   

position to switch the oven off.
DIAMOND CLEAN FUNCTION

To use the “Diamond Clean” cleaning function, pour 

200 ml of drinking water onto the bottom of the oven, 

then turn the selection knob and the thermostat knob 

to the   symbol.
We recommend activating this function for 35 

minutes.

3.

 PREHEATING PHASE

After starting the function, the thermostat LED will 

light up to indicate that preheating is in progress.

Once preheating is complete, the thermostat LED will 

switch off to indicate that the oven has reached the 

set temperature: Place the food into the oven and 

proceed with cooking.

Please note: Placing food in the oven before preheating has 

finished may have an adverse effect on the final cooking 

result.

. SETTING THE TIMER

This option does not interrupt or program cooking 

but allows you to use the display as a timer, either 

while a function is active or when the oven is 

switched off.
To set and start the timer, turn the 

timer knob

 to the 

length of time you require: An audible signal will 

sound once the timer has finished counting down the 

selected time.

DAILY USE

Summary of Contents for SA3330HIX









Reviews: