The Problem Solver
(continued,
PROBLEM
OVEN WILL NOT
SELF-CLEAN
OVEN DOOR WILL
NOT OPEN
SELF-CLEAN CYCLE
CONTROL BEEPS
AFTER ENTERING
OVEN TIME OR
STOP TIME
“F-” AND A NUMBER
FLASH ON DISPLAY
POSSIBLE CAUSE AND REMEDY
●
Oven temperature is too high to set self-clean operation. A11ow the oven to cool
and reset the controls.
●
Oven must cool below locking temperature (approximately 30 minutes after the
clean cycle is complete).
●
This is reminding you to enter a bake temperature.
●
the time display flashes “F-” and a number, you have function error code.
Press the
pad. Allow oven to cool for one hour. If the failure code
repeats, disconnect all power to the range. Call for service.
30
