8
PRODUCT FICHE
WWW
The product fiche with energy data of this
appliance can be downloaded from the website
docs . hotpoint . eu
HOW TO OBTAIN THE USE AND CARE GUIDE
>
WWW
Download the Use and Care Guide
from our website
docs . hotpoint . eu
(you can use this QR Code), specifying the
product's commercial code.
> Alternatively, contact our Client After-sales Service
CONTACTING OUR AFTER-SALES SERVICE
You can find our
contact details in the
warranty manual. When
contacting our Client
After-sales Service,
please state the codes
provided on your
product’s identification
plate.
XXX/XXX
XXXXXXXXXXXX
XXXXXXXXXXXX
400010886703
Printed in Italy
001
INTERIOR AND EXTERIOR SURFACES
• Clean the surfaces with a damp cloth. If they are very
dirty, add a few drops of pH-neutral detergent. Finish
off with a dry cloth.
• Clean the door glass with a suitable liquid detergent.
• At regular intervals or in case of spills, remove the
turntable and its support to clean the bottom of the
oven, removing all food residue.
• The grill does not need to be cleaned as the intense
heat burns away any dirt: Use this function on a
regular basis.
ACCESSORIES
All accessories are dishwasher safe with the exception
of the crisp plate.
The crisp plate should be cleaned using water and
a mild detergent. For stubborn dirt, rub gently with
a cloth. Always leave the crisp plate to cool down
before cleaning.
Make sure that the oven has cooled down before
carrying out any maintenance or cleaning.
Do not use steam cleaners.
Do not use wire wool, abrasive scourers or abrasive/
corrosive cleaning agents, as these could damage
the surfaces of the appliance.
Problem
Possible cause
Solution
The oven is not working.
Power cut.
Disconnection from the
mains.
Check for the presence of mains electrical power
and whether the oven is connected to the
electricity supply.
Turn off the oven and restart it to see if the fault
persists.
The oven makes noises, even
when it is switched off.
Cooling fan active.
Open the door or wait until the cooling process has
finished.
The display shows the letter “F”
followed by a letter or number.
Software fault.
Contact you nearest After-sales Service Centre and
state the letter or number that follows the letter “F”.
CLEANING
TROUBLESHOOTING
Download the Use and Care Guide at
docs . hotpoint . eu
for more information
WWW
WWW
