background image

GB

7

Ensure the drain hose is securely 

attached, to prevent it coming away 
while the machine is in use and 
causing a flood. 

Fit hose to waste securely using 

a “Jubilee” type

 

clip.

Anti-flooding protection

*

To ensure floods do not occur, the dishwasher:
- is provided with a special system which blocks the water supply 
in the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety 
device 

New Acqua Stop

*

, which guarantees anti-flooding 

protection even in the event of a supply hose rupture

.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstance should the water inlet hose be cut as it 

contains live electrical parts.

The Company shall not be held responsible for any incidents 

that occur if these regulations are not observed

Switching the appliance on for the first time

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and the 
retaining elastic elements from the upper rack, if any.
Immediately before the first washing, completely fill the salt 

dispenser with water and add only then approximately 1 kg of salt 
(see chapter entitled Rinse aid and refined salt). The water may 

overflow: this is normal and is not a cause for concern. Select 

the water hardness value (see chapter entitled Rinse aid and 

refined salt). - After the salt has been poured into the machine, 

the LOW SALT indicator light* switches off.

If the salt dispenser is not filled, the water softener and the 

heating element may get damaged as a result.

The machine has a buzzer/set of tones 

(depending on the 

dishwasher model

)

 to inform the user that a command has 

been implemented: power on, cycle end etc. 

The symbols/indicator lights/LEDs on the control panel/
display may vary in colour and may have a flashing or fixed 
light 

(depending on the dishwasher model)

.

The display provides useful information concerning the 
type of wash cycle, wash cycle phase, remaining time, 
temperature etc.

*

 

Only available in selected models.

Summary of Contents for LTF 8M121





















Reviews: