The Problem
(continued)
PROBLEM
SPOTS AND
FILMING ON
GLASSES AND
FLATWARE
CLOUDINESS ON
GLASSWARE
POSSIBLE CAUSE AND REMEDY
Spotting can be caused by these things:
●
Extremely hard water. (See page 6.)
●
Low inlet water temperature. (To test, see page 6.)
●
Overloading the dishwasher.
●
Improper loading. (See pages 8 and 9.)
●
Old or damp powder detergent.
●
Phosphate level in detergent too low. (See page
●
Rinse agent dispenser empty. (See page 6.)
●
Too little detergent. (See page 7.)
Due to varying local water conditions and personal preferences, try several brands of
detergents to find one that gives the best results for you. A liquid dishwasher detergent
may help reduce filming.
To remove stubborn spots and film from glassware:
1. Remove all metal utensils from the dishwasher.
2. Do not add detergent.
3. Select Normal Wash cycle.
4. Start the dishwasher and allow to run for 15 to 20 minutes. The dishwasher
now be in the main wash.
5. Then open the door and pour 2 cups
of white vinegar into the bottom of
the dishwasher.
6. Close the
door and allow to complete the cycle.
If vinegar rinse doesn’t work:
Repeat as above,
use 1/4 cup
of citric
acid crystals instead of vinegar. (Most drugstores carry citric acid crystals. If yours
doesn’t, call GE Factory Service.)
Using a vinegar or citric acid crystal rinse more than twice a month? Consider a
home water softener.
If vinegar or citric acid crystal rinse doesn’t work, the cloudiness “etching.”
The
film cannot be removed.
can be prevented:
Use less detergent if you have soft water. Wash glassware in
the shortest cycle that will get them clean.
Water temperature entering dishwasher exceeds
12
