manualshive.com logo in svg

Hotpoint HCM15, Instructions For Use Manual

Share
Download
Hotpoint HCM15 Instructions For Use Manual Download Page 12

12

GB

The machine will start an automatic descaling cycle 
with pauses programmed by the manufacturer and 
automatically managed by the machine. 
The display will show:

MACHINE IS DESCALING

6. At the end of the cycle, dispensing of the descaling 
solution will stop and the display will show: 

RINSE MACHINE
FILL WATERTANK

7. Rinse the water tank 
thoroughly and fill it with 
fresh drinking water. 

Replace the tank and 
close the front panel. 
The display will show:

RINSE MACHINE
PRESS WATER KEY

8. Place a suitably sized 
container below the 
steam spout and press 
the 

 key. 

Rinsing of the machine 
circuits begins and the 
display will show:

MACHINE IS RINSING

9. When the rinse cycle is complete, the display will 
show:

RINSING FINISHED
PRESS WATER KEY

12. Fill the water tank, press the 

 key, reprime the 

circuits and leave the machine to heat up.

! 

If you are using a product other than the 

recommended one it is important to follow the 
manufacturer’s instructions shown on the pack of the 
descaling product.

Interrupting the descaling cycle

If the descaling cycle is interrupted by the machine 
switching off, it is resumed when the machine is 
switched on again.

The descaling cycle may be interrupted by pressing the 

 key; the display shows:

MACHINE IS DESCALING
INTERRUPTED

press the 

 key and the descaling cycle resumes. If 

the 

 key and the 

 key are pressed, the display 

shows:

DESCAL. INTERRUPTED
EMPTY WATERTANK

Warning! After the operation, empty the water tank of 
the descaling solution and wash it with fresh drinking 
water. The machine’s circuit must be washed with a 
rinse cycle. 
 
Proceed as for a normal rinse cycle as described at 
point 7 of the previous chapter.

Summary of Contents for HCM15

























Reviews:

No comments

Brands by name

Popular brands

Load more brands