WARNING: This appliance must be earthed.
Fuses
Your appliance comes fitted with a plug
and a 13A fuse. If you need to
replace the fuse, only those rated
at 13A and ASTA approved to
BS1362 should be used. If you
lose the fuse cover, a
replacement may be obtained
from your local Hotpoint authorised
Service Centre or Electricity company.
Correct replacement is identified by colour coding or the
marking on base of plug.
WARNING: Do not use plug unless fuse cover is fitted.
Changing the Plug
Cut off and dispose of the supplied plug if it does not fit your
socket.
WARNING: To avoid a shock hazard do not insert the discarded
plug into a socket anywhere else.
IMPORTANT: WIRES IN THE MAINS LEAD ARE
COLOURED IN ACCORDANCE WITH THE FOLLOWING
CODE:
Green/Yellow
-
Earth
Blue -
Neutral
Brown
-
Live
If you change the
plug, the colour of
wires in the mains
lead may not
correspond with the
colour of the markings
identifying terminals
in the plug. You
should therefore wire
it as shown (Fig 2).
Changing the Mains Lead
A special lead can be ordered from Hotpoint Service UK: 08709
066 066 or Republic of Ireland: 1850 302 200
If you have damaged the existing lead or require a longer one a
charge will be made. It is strongly advised that this work is
carried out by a qualified electrician.
CE marking certifies that this appliance conforms
to the following EEC directives:-
Low Voltage Equipment - 72/23/EEC & 93/68 EEC
Electromagnetic Compatibility - 89/336/EEC, 92/31/EEC &
93/68/EEC
2
13A ASTA
approved
fuse to
BS1362.
Brown
(Live)
wire to
terminal
marked
‘L’ or coloured red.
Cord clamp
Fig 1.
Fig 2.
Electrical Supply
Blue (Neutral)
wire to terminal
marked ‘N’ or
coloured black.
Green and yellow (Earth)
wire to terminal
marked ‘E’,
symbol , or
coloured
green and
yellow.
