Hotpoint FFLAA58WDG Service Information Download Page 2

2 of 18

Service Manual UK

Indesit

 

Company

English

HEALTH AND SAFETY

For the servicing of refrigeration products, containing Isobutane R600a refrigerant.
These instructions are in addition to any other Company procedures already published.

Published primarily for Indesit Company engineers working in the UK or Southern Ireland, for 
which these instructions are MANDATORY.

1.

Only engineers who have been trained on the safe handling of Isobutane R600a refrigerant are 
authorised to transport, store or carry out system repairs.

2.

This manual is not intended as a comprehensive repair/maintenance guide to the appliance.

3.

Must only be used by suitably qualified persons having technical competence, applicable product 
knowledge, suitable tools and test equipment.

4.

Servicing of electrical appliances must be undertaken with the appliance disconnected (unplugged 
from the electrical supply).

5.

Servicing must be preceded by earth continuity and insulation checks, plus refrigerant leak
detection.

6.

Personal safety precautions must be taken to protect against accidents caused by sharp edges on 
metal and plastic parts.

7.

After servicing, the appliance must be rechecked for electrical safety.

8.

Smoking, naked flames, or operating gas and/or electrical equipment (including cordless power 
tools) are forbidden within the storage area, working area and vehicles used to transport Isobutane.

9.

The carrying case for the scales and refrigerant must display a red flammability label
Part Number C00247960 (8100063) that should be visible and readable at all times.

10. The vehicle and storage area must be ventilated as far as is reasonably practicable and the 

aluminium case kept out of direct sunlight. The storage temperature of Isobutane should not exceed 
50°C.

11. Vehicles carrying R600a canisters:

The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2009 
(CDG 2009) require every transport unit to be equipped with one portable fire extinguisher, Part 
Number C00274640, for inflammability classes 

1

 A, B and C, with a minimum capacity of 2 kg dry 

powder.

12. The vehicle transporting Isobutane (R600a) refrigerant must display a Red Flammable Gas warning 

sticker (Part No. C00247960 [(8100063)].

13. Engineers should not wear clothes that are liable to cause static discharge ('electrostatic sparking').

14. Avoid working in small rooms.

15. Do not work in cellars.

16. Whenever possible move the appliance into a larger open area away from possible ignition sources.

17. Request the customer to turn off all other electrical and gas appliances in the near vicinity of the 

repair and note that it is done. 
Customers should be advised to restrict activity within the near vicinity for a short time.

18. Isobutane refrigerant must be vented to atmosphere, (outside of the premises e.g. via open window 

through the clear plastic hose supplied).

continued...

Summary of Contents for FFLAA58WDG



















Reviews: