background image

12

GB

Special wash cycles and Options

Extra drying*

 

To improve the dryness level of the crockery, press the 

EXTRA DRYING button; the indicator light will illuminate. If it 

is pressed again the option will be deselected.
A higher temperature during the final rinsing and a longer 
drying phase improve the dryness level.

The EXTRA DRYING option increases the duration of 

the wash cycle.

Delayed start*

It is possible to delay the start time of the wash cycle by 

3, 

6 or 9

 hours:

1:After  selecting  the  desired  wash  cycle  and  any  other 
options,  press  the  DELAYED  START  button.  the  indicator 

light will illuminate.

2: Select the desired delay time by pressing the Delayed 

Start button repeatedly. The wash phase (3 hours), the 

drying phase (6 hours) and end (9 hours) indicator lights 

will illuminate in succession.  

If the Delayed Start button is pressed again, the option is 

deselected and the indicator light switches off.
3. After the selection process, the countdown will begin if 

the Start/Pause button is pressed. The selected delay period 
indicator  light  flashes  and  the  Start/Pause  button  stops 

flashing (fixed light).

3. Once this time has elapsed, the DELAYED START indicator 

light switches off and the wash cycle begins.

The Delayed Start function cannot be set once a wash  
cycle has been started.

Wash options*  

The OPTIONS may only be set, changed or reset after 
the wash cycle has been selected and before the Start/
Pause button has been pressed.

Only the options whic are compatible with the type of wash 

cycle set may be selected. If an option is not compatible 
with the selected wash cycle 

(see Table of wash cycles)

, the 

corresponding symbol flashes rapidly 3 times.
If an option is selected which is not compatible with another 
(previously selected) option, it will flash 3 times and switch 
off, while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press 
the corresponding button again.  

Multi-functional tablets

(Tabs)

This option optimises washing and drying results.

When  using  multi-functional  tablets,  press  the  MULTI-
FUNCTIONAL TABLETS button; the corresponding indicator 

will light up. If the button is pressed again, the option will be 
deselected.

The “Multi-functional tablets” option results in a 

longer wash cycle.

The use of tablets is only recommended for models 

having this option and it is not recommended with wash 
cycles which do not specify the use of multi-functional 
tablets

.

Notes: 

Optimum performance levels when using the “Fast" and "Express 
40’” cycles can be achieved by respecting the specified number 

of place settings.

*

  The  Eco  wash  cycle  complies  with  regulation  EN-50242. 

Although it has a longer duration than other wash cycles, it uses 
less energy and is less harmful to the environment.

Note for Test Laboratories: 

for information on comparative EN 

testing conditions, please send an email to the following address: 

[email protected]

Half load*

 

If there are not many dishes to be washed, a half load cycle 
may be used in order to save water, electricity and detergent. 

Select the wash cycle and press the HALF LOAD button: the 

indicator light will illuminate. 

Press the HALF LOAD button to deselect this option.

Remember to halve the amount of detergent.

*

 Only available in selected models.

Summary of Contents for FDEB 31010 EXPERIENCE





















Reviews: