11
Automatic cleaning with the fast clean function
•
Once the oven door has been locked, you cannot make
any changes to the cycle time and cycle end settings.
•
If the temperature in appliance’s electrical component
area has reached a safe value, it is not possible to
start the “Fast clean” cycle. The word “HOT” will appear
on the display. Wait for the cooling fan to switch off
before restarting the “Fast clean” programme.
What happens at the end of an automatic cleaning
cycle?
At the end of the automatic cleaning cycle, the word “end”
is displayed and an acoustic signal is sounded, which can
be silenced just by pressing any one of the buttons. Turn
knob “L” to the “0” setting and the word “end” will disappear.
To open the oven door, you will have to wait until the tem-
perature inside it has dropped to a suitable value.
You will notice some white dust deposits on the bottom and
sides of your oven; remove them with a damp sponge once
the oven has cooled down completely.
You may on the other hand prefer to take advantage of the
heat accumulated to start cooking immediately; in this case
the dust can stay where it is: it is completely harmless and
will not affect your food in any way.
Warning: to maximise the efficiency and life of the
appliance, we recommend that automatic clean is carried
out with the hob off.
Fast clean programming
The fast clean cycle time and/or cycle end time can be
programmed after selecting the fast clean mode, and within
the 10 first minutes of operation..
Programming the fast clean cycle time
Press button “4” and then adjust the cooking time by press-
ing keys
s
and
t
. Press the “4” button to store the
setting. The time left until the end of the fast clean cycle
will be displayed.
Once this time is up, the word «end» will be displayed and
a sequence of acoustic signals will be sounded to indicate
that the cleaning cycle is complete.
•
Press any button to silence the acoustic signal.
•
Turn knob “L” back to position 0 to remove the word
«end» from the display.
For example
It is 9:00 a.m. and a fast clean cycle time of 1 hour and 15
minutes is programmed. The fast clean cycle will end
automatically at 10:15 a.m..
Cooking time
= 1h15
Manual
start
Automatic stop
Time
Programming the fast clean cycle end time
Press button “3” and then adjust by pressing keys
s
and
t
. Press the “3” button to store the setting. The time
left until the end of the fast clean cycle will be displayed.
When the previously selected fast clean cycle time is up,
the word «end» will be displayed and a sequence of acoustic
signals will be sounded to indicate that the fast-clean mode
is complete.
•
Press any button to silence the acoustic signal.
•
Turn knob “L” back to position 0 to remove the word
«end» from the display.
For example
It is 9:00 a.m. and the fast clean cycle end time is set at
10:15 a.m.. Fast clean will last 1 hour and 15 minutes.
Cooking time
= 1h15
Manual
start
Automatic stop
Time
Delayed fast clean cycle programming
Press button “4” and then adjust the cooking time by press-
ing keys
s
and
t
. Press the”4" button to store the
setting and display it.
Press button “3” and then adjust end cooking time by press-
ing keys
s
and
t
. Press the”3" button to store the
setting and the display will remind you of the end cooking
time and of the temperature set alternately.
For example
It is 9:00 a.m. and a fast clean cycle time of 1 hour and 15
minutes and 12:20 as the cycle end time are programmed.
The fast clean cycle will start automatically at 11:15 a.m..
12h30
Cooking time
= 1h15 and
end cooking
time set at
12.30 p.m.
9h00
10h00
11h00
12h00
11h15
Automatic
start
Programmed end
The icon A will remind you that you have programmed the
fast clean cycle time and/or the cycle end time.
To cancel a programmed time
To cancel any programming you have made, set knob “L”
to position “0”.
Summary of Contents for EG600P
Page 16: ...16 NOTES...
Page 17: ......
