Hotpoint ECOT7F 1292, Instructions For Use Manual

Page: 8 / 84

8
GB
Wash cycles
Table of wash cycles
Mix 15’
(wash cycle 5) this wash cycle was designed to wash lightly soiled garments quickly: it lasts just 15 minutes and therefore
saves both energy and time. By selecting this wash cycle (5 at 30°C), it is possible to wash different fabrics together (except
for wool and silk items), with a maximum load of 1.5 kg.
Goodnigt cycle (wash cycle 6). This is a silent cycle which can be run at night, when the electricity prices are lower. The wash
cycle is designed for cottons and synthetics. At the end of the cycle the machine stops while there is still water in the drum; to
spin and drain the laundry press the START/PAUSE button; alternatively the machine will perform the spin cycle and drain the
water automatically after 8 hours.
Cotton Standard 20° (wash cycle 10) ideal for heavily soiled cotton loads. The effective performance levels achieved at cold
temperatures, which are comparable to washing at 40°, are guaranteed by a mechanical action which operates at varying
speed, with repeated and frequent peaks.
Eco cycles
The Eco Cycles assure energy saving by eliminating the need of heating water and it’s an advantage both to your energy
bill and the environment! These innovative Eco programmes (Cotton 11 , Synthetics 12 and Fast Wash 13 ) are availa-
ble for various fabrics and different quantity of garment; they have been designed to guarantee a high cleaning action
even at low temperature and can be used for lightly to medium soiled loads. Eco Cycles give the best results thanks
to an intensified wash action, water optimization and are carried out in the same average time of a standard cycle.
For the best washing results with Eco Cycles we recommend the usage of a liquid detergent.
W
ash cycles
Description of the wash cycle
Max.
temp.
(°C
Max.
speed
(rpm)
Detergents
Max. load (Kg) Residual dam-
pness %
Energy consum-
ption kWh
Total water lt
Cycle duration
Pre-
wash Wash
Fabric
softe-
ner
Ble-
ach
Essentials cycles
1 Prewash:
extremely soiled whites.
90° 1200    - 7 53 1,92 67 160’
2 Cotton Standard 60° (1):
heavily soiled whites and resistant
colours.
60°
(Max. 90°)
1200 -    7 53 1,14 52,5 195’
3 Cotton Standard 40° (2): lightly soiled whites and delicate colours. 40° 1200 -    7 53 0,94 61 190’
4 Synthetics:
heavily soiled resistant colours.
60° 800 -    3 44 0,85 39 110’
4 Synthetics (3):
lightly soiled resistant colours.
40° 800 -    3 44 0,53 39 100’
5 Mix 15’:
to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand).
30° 800 -
 
- 1,5 71 0,08 29 15’
Special cycles
6 Goodnight cycle: lightly soiled delicate colours. 40° 800 -
  
4 - - - 280’
7 Shirts 40° 600 -
 
- 2 - - - 80’
8 Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -
 
- 1 - - - 55’
9 Wool: for wool, cashmere, etc. 40° 800 -   - 1 - - - 65’
Eco cycles
10 Cotton Standard 20°: lightly soiled whites and delicate colours. 20° 1200 -
  
7 - - - 180’
11 Cottons
Cold
Water
1200 -
 
- 7 53 0,10 51 85’
12 Synthetics
Cold
Water
800 -
 
- 2,5 48 0,07 27 70’
13 Fast Wash
Cold
Water
800 -   - 2,5 71 0,04 34 30’
Partials wash cycles
A Rinse - 1200 - -   7 - - - 36’
B Spin - 1200 - - - - 7 - - - 16’
C Pump out - 0 - - - - 7 - - - 2’
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 2 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 3 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.
3) Long wash cycle for synthetics: set wash cycle 4; with a temperature of 40°C.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water
temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.