End-of-Cycle Signal.
(Operates with any cycle.)
The signal control can be set anywhere between
OFF and LOUD, depending on the desired sound
level. The signal
sound just before the end of
the cycle to remind you to remove the clothes.
To stop the signal while sounding, turn the signal
control to OFF or advance the Cycle Selector to OFF.
The signal should always be used when drying
polyester knits or permanent press items which
should be removed as soon as the dryer stops to
help prevent setting of wrinkles.
The signal should also be used with the
Press Guard feature.
signal
The Difference Between Automatic and Timed Drying
Automatic Drying
Timed Drying
When using the Automatic Cycles, the
When using the Timed Cycles, you select the number
Automatic Dry Control system
continually senses
of minutes you wish the dryer to run and it turns off at
the temperature of the air in the dryer drum. Wet
the end of this time period.
laundry keeps the air cool. When laundry is dry
enough ( and the drum air
enough) the heat
turns off. When the air cools, the heat turns back on.
This off and on cycling may happen a number of
times (depending on the fabric, load size and
Selector setting). The Cycle Selector advances (when
the heat is
until it automatically turns off dryer.
Polyester Knits & Permanent Press Drying Tips
●
DO NOT
●
REMOVE CLOTHES
●
PLACE ON
Garments being dried or
PROMPTLY—To help prevent
Permanent press and polyester
should tumble freely.
wrinkling, remove clothes from
knit garments look best if placed
the dryer promptly at the end of
on hangers after drying.
the drying cycles.
7
