To Remove
1. Remove
from the shelf
above the Sealed & Fresh drawer
take
the shelf. Take food off
the glass cover
out the drawer.
2. Put your fingers behind the
gasket the rear the
pull forward. Remove the gasket.
3.
Pull the drawer partway out.
Reach in, push the rear of the glass
up; at the same time, push it
until it
front-corner retainers.
4. Tilt and remove the cover.
5.
Pull the
forward, lift the
front to clear stops,
remove the
drawer.
refrigerator door
doesn’t open completely. pull the
drawer out until it hits the door.
Then
the
up until it is
higher than the drawer supports.
tilt it and
it
6. If tape holds Convertible
cover to drawer supports,
the tape. Pull drawer partway out.
Reach in, push the
of the glass
up and, at the same
back,
until
it clears front-corner” retainers.
,
Tilt
drawer.
After clean
replace in reverse
order.
When drawers and
are back
in
reinstall
gasket at the
rear of the Sealed Fresh drawer.
Fit the
of the plastic drawer
support into
gasket,
with the
you.
the gasket snaps
into
I
7. Tilt and remove the
Summary of Contents for CSX24X
Page 22: ...Noks 22 ...
