8
G
B
will be switched on.
To display the time remaining for the other
programmed hotplates, press the
button
repeatedly. The times remaining for each hotplate
will be shown in a clockwise order, beginning with
the front left hotplate.
Ch
anging
th
e
pr
og
r
a
mm
e
1. Press the
button repeatedly until the duration
you wish to change is shown.
2
. Use the
buttons to set the new duration.
3
. Confirm by pressing the
button.
To cancel a programme, follow the above
instructions. At step
2
, press the
-
button: the
duration decreases progressively until it reaches 0
and switches off. The programme resets and the
display exits programming mode.
T
i
m
e
r
The hob must be switched on.
The timer can be used to set a duration up to 99
minutes.
1. Press the
programming button until the timer
indicator light is illuminated.
2
. Set the desired duration using the
-
and
+
buttons.
3
. Confirm by pressing the
button.
The timer begins counting down immediately. When
the time has elapsed, a buzzer will sound (for one
minute).
C
ont
r
ol
p
an
e
l
lo
c
k
When the hob is switched on, it is possible to lock
the oven controls in order to avoid accidental
changes being made to the settings (by children,
during cleaning, etc.). Press the
button to lock
the control panel: the indicator light above the button
will switch on.
To use any of the controls (e.g. to stop cooking),
you must switch off this function. Press the
button for a few moments, the indicator light will
switch off and the lock function will be removed.
Sw
it
c
h
in
g
o
ff
t
h
e
h
o
b
Press the
button to switch the appliance off.
If the control panel lock has been activated, the
controls will continue to be locked even after the hob
is switched on again. In order to switch the hob on
again, you must first remove the lock function.
D
e
m
o
m
o
d
e
It is possible to set the hob to a demonstration
mode where all the controls work normally but the
heating elements do not switch on. To activate the
demo mode the hob must be switched on, with all
the hotplates switched off.
Press and hold the
+
and
-
buttons
simultaneously for
6
seconds. When the
6
seconds have elapsed, the ON/O
FF
and
CONTROLS LOCKED indicator lights will flash for
one second. Release the
+
and
-
buttons and
press the
button;
The display will show the text DE and MO and the
hob will be switched off.
When the hob is switched on again it will be set to
the demo mode.
To exit this mode, follow the procedure described
above. The display will show the text DE and O
F
and the hob will be switched off. When it is next
switched on, the hob will function normally.
P
r
a
c
ti
c
al
a
dv
i
ce
on
usin
g
t
h
e
a
pp
lian
ce
To obtain the best results from your hob:
Use pans with a thick, flat base in order to fully
utilise the cooking zone.
Always use pans with a diameter which is large
enough to cover the hotplate fully, in order to use all
the available heat.