Hotpoint BWM 129, Instructions For Installation And Use Manual

Page: 13 / 20

11
GB
Function Effect Comments
Enabled with
programmes:
Delay
Start
Delays the
start of the
wash by up to 9
hours.
Press the button repeatedly until the LED corresponding to
the desired delay is turned on.
The fifth time the button is pressed, the function will be
disabled.
N.B.: Once you have pressed the Start/Reset button, the delay
can only be decreased if you wish to modify it.
All
Super
Wash
Allows for an
impeccable wash,
visibly whiter
than a standard
Class A wash.
This function is incompatible with the QUICK WASH function.
A, B, C, D,
E, F, G, H
Quick
Wash
Cuts the
duration of the
wash cycle by
30%.
This function is incompatible with the SUPER WASH function.
A, B, C, D,
E, F, G, H
Rinse Hold
This function
reduces the
amount of
creasing on
fabrics, making
them easier to
iron.
This function allows you to interrupt a programme keeping the
washing soaking in water before the spin cycle (Anti-crease)
and the Rinse cycle phase LED will flash. It is a very useful
function in particular because it can be used for silk and
synthetics.
To conclude the cycle, press the Rinse Hold button.
F, G, H, L
and Light
Rinses
Personalisations
Setting the temperature (Variable Temperature )
Turn the VARIABLE TEMPERATURE knob to set the wash temperature (see Programme table on page 10) .
The temperature can be lowered, or even set to a cold wash (Cold).
Setting the spin speed (Variable Spin)
Turn the VARIABLE SPIN SPEED knob to set the spin speed for the programme selected.
The maximum spin speeds for each programme are as follows:
Programmes Maximum spin speed
Cotton 1200 rpm
Synthetics 800 rpm
Wool 600 rpm
Silks no
The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting “No Spin”.
The washing machine will automatically prevent you from selecting a spin speed higher than the maximum
speed for each programme.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Service
Troubleshooting
Precautions
Care
Programmes
Detergents
Installation
Description