Hotpoint ARTXD 129, Installation Instructions And Operation Manual

Page: 17 / 72

GB
17
Fig. 1
Fig. 2
Fig. 3
Fig. 4
How to open and to close the drum
A) Opening (Fig. 1):
Lift the external lid and open it completely.
B) Opening the drum (Soft opening):
With one finger, push the button indicated in
fig. 2
and the drum will open delicately.
C) Loading the washing machine (Fig. 3) .
D) Shutting (Fig. 4):
- close the drum fully by first shutting the front door
followed by the rear one;
- then ensure the hooks on the front door are
perfectly housed within the seat of the rear door;
- after the hooks have clicked into position, press both
doors lightly downwards to make sure they do not
come loose;
- finally shut the external lid.
E) Drum End Stop (Fig. 2):
Once the wash cycle has been completed, the drum will
position itself with doors facing upward for ease pf opening.
The display is useful when programming the machine and
provides a great deal of information.
The two upper strings A and B provide details of the wash
cycle selected, the wash cycle phase in progress and all
information relating to the progress status of the wash
cycle.
String C shows the time remaining until the end of the
wash cycle in progress and, if a DELAYED START has
been set, the time remaining until the start of the selected
wash cycle.
String D shows the maximum spin speed value (this de-
pends on the selected wash cycle); if the wash cycle does
not include a spin cycle, the string remains unused.
String
E
shows the maximum temperature value which
may be selected (this depends on the wash cycle used); if
the temperature of the wash cycle cannot be modified, the
string remains unused.
Indicator lights F correspond to the functions and light up
when the selected function is compatible with the set wash
cycle.
Door locked symbol
If the symbol is lit, this indicates that the washing machine
door is blocked to prevent it from being opened acciden-
tally. To prevent any damage from occurring, wait for the
symbol to switch itself off before opening the appliance
door (it will take about three minutes).
N.B.:
if the DELAYED START function has been activated,
the door cannot be opened; pauses the machine by pres-
sing the START/PAUSE button if you wish to open it.
!
The first time the machine is switched on, you will
be asked to select the language and the display will
automatically show the language selection menu.
To select the desired language press the TEMPERATURE
and SPIN buttons; to confirm the selection press the
CONTROL PANEL LOCK button.
Display
A
B
C
D
E
F
If you wish to select another language, switch off the
machine , press and hold the CONTROL PANEL LOCK
+ TEMPE SPIN buttons
simultaneously
for 5
seconds, then repeat the steps listed above.