9 of 30
Indesit
Company
Service Manual UK
English
TO STOP OR CHANGE A PROGRAMME
Press the ON-OFF button for approximately 3 seconds
Select PUMP OUT on the programme dial.
Switch on and re-start
When the machine has finished emptying.
Press the ON-OFF button
Select a new programme and re-start
NOTE:
If you cancel a HOT wash programme, take care when removing the laundry, it may still be
VERY HOT.
PROGRESS INDICATOR LIGHTS
These lights will light up when you choose a programme, to indicate the progress of the selected
programme.
When started, the first light in the cycle will stay lit and as the programme progresses, successive lights
will come on until the programme finishes.
DOOR LOCKED INDICATOR LIGHT
The 'Door Locked' indicator light will come on when you press the START / PAUSE button and will stay
lit throughout the programme. When the programme has finished the indicator light will go out and you
can then open the door, a double CLUNK noise will be heard from the door lock Solenoid at this point.
If the door is not closed properly prior to starting a programme the door lock solenoid will 'CLUNK'
approximately 5 times followed by a flashing DOOR indication in the display window, every 5 seconds
from then onwards there will be an audible beep.
Push the door closed and press START / PAUSE button to commence the cycle.
CHILD LOCK
To set the Child Lock, start the programme required then press and hold the Child Lock button for
2 seconds. At this point a red LED will illuminate on the button - Child Lock function is now active.
To Remove Child Lock
- Press and hold the Child Lock button down for 2 seconds.
NOTE: -
The Child Lock option will need to be removed before another programme can be selected.
