background image

15

D

ISHWASHER

Troubleshooting

In the unlikely event that you have problems with your machine, the following guide will
enable you to resolve many problems without having to call out a service engineer.

Fault Area

The Dishwasher Will Not
Start

Issue

Possible Installation/Electrical
Supply Fault

(Particularly if the machine
is being used for the first
time)

Cause/How to resolve…

     Check

-  Is the dishwasher plugged in and switched on?

-  Is there a power failure, check to see if other appliances working.

-  Check the fuse.

-  Is there a fault with the water supply/is the water supply tap turned on?

-  Is the water pressure supply sufficient?

-  Is the inlet hose kinked?

- Is the door closed properly?

Cycle

Cycle phase indicator
lights flashing
:

-    Has time delay been selected?

I

If a delayed start has been selected then the cycle phase indicator light

corresponding to the lenght of time delayed will flash.

For example:-
Pre wash flashing               - 3hr Delay Set
Wash                                    - 6hr Delay Set
Rinse                                    - 9hr Delay Set
Drying                                   -12hr delay Set

Follow the instructions below to cancel:-
Step 1
: Press the “Delay Start” Button until all light are out.
Step 2: Select wash programme as normal.

Please Note: The “Drying” light will also flash to indicate
the end of a programme. (See “Cycle Phase Indicator Lights
Flashing”below).

Salt Refill Light Flashing/
Not Going Out When Salt
Added

Salt refill light will flash if:-

You are using the Machine  for

      the first time
     Or
-    The salt level is low

         

lt rethfill

Delay Start

Button

The Salt refill light will flash when your dishwasher is switched on for the
first time and again when the salt levels become low - follow the instructions
on “Before Using Your Dishwasher” page on how to add salt to your
dishwasher.

Please Note:
-  The salt refill light will remain lit after the salt has been
   added for several consecutive cycles.

-  If you are using 3 in 1 tablets and do not add salt then
   the salt refill light will flash periodically for several
   consecutive cycle.

-  If 3 in 1 dishwasher tablets are used we still recommend
  that you add salt to prevent limescale deposits on your
  dishes.

   the

Summary of Contents for Aquarius FDW60





























Reviews: