GB
9
Wash cycles and functions
Table of wash cycles
Wash functions
!
If the selected function is not compatible with the
programmed wash cycle, the indicator light will flash
and the function will not be activated.
!
If the selected function is not compatible with another
function which has been selected previously, the indica-
tor light corresponding to the first function selected will
flash and only the second function will be activated; the
indicator light corresponding to the enabled function will
remain lit.
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.:
put the detergent in the relevant compartment.
Easy Iron
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine will perform
slow rotations of the drum; the “Easy Iron” and START/
PAUSE indicator lights will flash (orange) and the text “END
OF CYCLE” will appear on the display. To end the cycle,
press the START/PAUSE button or the “Easy Iron” button.
Eco Wash
The Eco Wash function saves energy by not heating the
water used to wash your laundry – an advantage both to
the environment and to your energy bill. Instead, intensified
wash action and water optimisation ensure great wash
results in the same average time of a standard cycle.
For the best washing results we recommend the usage of
a liquid detergent.
W
ash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load
(kg)
Residual dam-
pness %
Energy consum-
ption kWh
Total water lt
Cycle duration
Pr
ewash
W
ash
Bleach
Fabric softener
Anti Stain
40°
1600
-
5
-
-
-
180’
Cotton Standard 60°
(1st press of the button)
(1)
: heavily soiled whites
and delicate colours.
60°
(Max. 90°) 1600
(3)
7
44 0,90 52,5 215’
Cotton Standard 40°
(2nd press of the button)
(2)
: lightly soiled whites
and delicate colours.
40°
1600
-
7
44 0,88 80 170’
Cotton Standard 20°
(3rd press of the button)
: lightly soiled whites and
delicate colours.
20°
1600
-
7
-
-
-
175’
Synthetics
(1st press of the button)
: heavily soiled resistant colours.
60°
800
4,5 46 1,03 60 115’
Synthetics
(1st press of the button)
(4)
: lightly soiled resistant colours.
40°
800
4,5 46 0,56 60 100’
Synthetics
(2nd press of the button)
: lightly soiled delicate colours.
40°
800
4,5
-
-
-
75’
Fast Wash 60'
(1st press of the button)
: to refresh normal soiled garments quic-
kly (not suitable for wool, silk and clothes which require washing by hand).
60°
1600
-
-
3,5 44 0,84 44 60’
Fast Wash 30'
(2nd press of the button)
: to refresh lightly soiled garments quic-
kly (not suitable for wool, silk and clothes which require washing by hand).
30°
800
-
-
3
71 0,20 38 30’
M
My Cycle:
allows for any wash cycle to be stored.
Bed&Bath:
washes bathroom laundry and bedlinen.
60°
1600
-
7
-
-
-
140’
Wool:
for wool, cashmere, etc.
40°
800
-
-
2
-
-
-
90’
Delicates
30°
0
-
-
1
-
-
-
80’
Spin
(1st press of the button)
-
1600
-
-
-
-
7
-
-
-
16’
Rinse
(2nd press of the button)
-
1600
-
-
-
7
-
-
-
36’
Pump out
(3rd press of the button)
-
0
-
-
-
-
7
-
-
-
2’
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle
60°C
(1st press of the button).
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle
40°C
(2nd press of the button).
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
3) At 60 °C the “Prewash” function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle
40°C
(2nd press of the button)
.
4) Long wash cycle for synthetics: set wash cycle 60°C
(1st press of the button
)
; temperature of 40°C
(press TEMPERATURE button).
