7
2. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely normal.
Before starting to cook food, we therefore recommend
heating the oven with it empty in order to remove any
possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it. Heat the oven to 240 °C for about one hour. The oven
must be empty during this time. Follow the instructions
for setting the function correctly.
Please note: It is advisable to air the room after using the
appliance for the first time.
DAILY USE
1. SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require.
2. ACTIVATE A FUNCTION
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
To interrupt the function at any time, switch off the
oven, turn the selection knob and the thermostat
knob to and .
3. USING THE ELECTRONIC PROGRAMMER
By pressing the time button it is possible to select
various mode to keep or program the cooking time.
Please note: After few seconds without any
interaction, a buzzer sounds and all settings will be
confirmed.
SETTING THE MINUTE MINDER
This option does not interrupt or activate cooking but
allows you to use the display as a timer, both while a
function is active and when the oven is off.
To activate the timer, long press the time button: the
symbol flashes on the display (1).
Use the and buttons to set the desired duration:
the countdown begins after a few seconds. The
display shows the time of the day and the remains
lit, confirmating the timer has been set (2).
At the end, long press the time button to deactivate
the alarm.
1
2
Please note: To view the countdown and change it if
necessary, press the time button 2 seconds again.
SETTING THE DURATION
After selecting and activating the function, in order
to stop it automatically, you can set a cooking time.
Long press the time button: the symbol flashes (3).
Press the time button again: DUR and A will flash on
the display (4).
Set the duration using the and buttons.
After a few seconds, the display will show the time
of the day while AUTO remains lit, confirming the
setting (5).
3
4
5
Please note: To see how much time is left and change the
remaining cooking time repeat the steps above.
When the set cooking time is over, an alarm will
sound and the cooking will be stopped (6).
6
Long press the time button to deactivate the alarm.
Return the selection knob and thermostat knob to
and to switch off the oven.
FULLY AUTOMATIC PROGRAM / DELAYED START
You can delay the start of the function by
programming its end time.
After setting the duration, press the time button until
the display shows END (7).
Press the buttons and to select the desired
cooking end time. After a few seconds the display
shows the time of the day, while the symbol
switches off and A remains lit, confirming the setting
(8).
Please note: To see and change the settings set repeat the
steps above.
The function will remain paused until the symbol
lights up: at that point the oven proceeds
automatically with the selecetd cooking mode (9).
7
8
9
At the end, long press the time button to deactivate
the alarm. Return the selection knob and thermostat
knob to and to switch off the oven.
Please note: By only selecting the end time (with no duration
setting), the function will immediately start. The cooking will
continue up to the required end time.
OPTIONS
ALARM TONE
To set the alarm tone, long press button .
To select the desired tone, press buttons or , then
press the
time button
to confirm.
BRIGHTNESS
To set the brightness of display, long press button .
To select the desired tone, press buttons or , then
press the
time button
to confirm.
