Hotpoint Ariston HS MR 2A ZU B, Operating Instructions Manual, Page: 15 / 96

15 15
en
INSTALLATION
• Do not repair or replace any part of the appliance unless specifi-
cally stated in the user manual. After unpacking the appliance, make
sure that it has not been damaged during transport. In the event of
problems, contact the dealer or your nearest After-sales Service. Once
assembled, packaging waste (plastic, styrofoam parts etc.) must be
stored out of reach of children - risk of suffocation.
• Remove all packaging materials, including any adhesive label, be-
fore operating the appliance.
ELECTRICAL WARNINGS
• Before connecting the appliance, verify that electrical ratings cor-responds
to your supply system ratings. The rating plate is on the battery charger.
• It must be possible to disconnect the appliance from the power sup-
ply by unplugging it if plug is accessible, or by a multi-pole switch in-
stalled upstream of the socket and the appliance must be earthed, in
conformity with national electrical safety standards.
• Do not use extension leads, multiple sockets or adapters. Do not use
the appliance when you are wet or barefoot. Do not operate this appli-
ance if it has a damaged power cable or plug, if it is not working properly,
or if it has been damaged or dropped. If the power cable is damaged, it
must be replaced with an identical one - risk of electrical shock.
CLEANING AND MAINTENANCE
• WARNING : Ensure that the appliance is switched off and discon-
nected from the power supply before performing any cleaning or main-
tenance operation - risk of electrical shock. Never use steam cleaning
equipment.
• Do not spray cleaners directly on the appliance – risk of electrical
shock.
• After washing the dust container and filters allow them to dry out. Do
not use the appliance with wet dust container or filters – Risk of electrical
shock or fire.