Hotpoint Ariston HB 0806, Operating Instructions Manual, Page: 22 / 96

22
it en
500ml Chopping bowl
Food
Maximum Operation
time
Preparation
Meat 250g 8sec 1~2cm
Herbs 50g 8sec /
Nuts 100g 8sec /
Cheese 100g 5sec 1~2cm
Bread 80g 5sec 1~2cm
Onions 150g 8sec 1~2cm
Biscuits 150g 6sec 1~2cm
Soft fruit 200g 6sec 1~2cm
Flour 350g
10sec / Sugar 8g
Salt 8g
Big bowl (1250ml) (Chopping)
Food
Maximum Operation
time
Preparation
meat 500g 10sec 1~2cm
herbs 100g 8sec /
nuts,
almonds 300g 10sec /
cheese 200g 10sec 1~2cm
bread 160g 8sec 1~2cm
onions 300g 8sec 1~2cm
biscuits 300g 8sec 1~2cm
soft fruit 400g 10sec 1~2cm
Flour 500g
10s /
Water 300g
Barm 10g
Sugar 10g
Salt 10g
Big bowl (1250ml) (Slicing/Grating)
Food
Maximum Operation
time
Preparation
Potatoes 500g 60s Suitable for
feed inlet
Carrots 500g 60s Suitable for
feed inlet
Cucumber 500g 60s Suitable for
feed inlet
CLEANING AND MAINTENANCE
To prevent any damage to the appliance do not use
harsh solvents or abrasive cleansers when cleaning.
Unplug the appliance from the power supply before
cleaning.
1. Wash the blender attachments and lids under
running water without any abrasive cleaners or
detergents. After cleaning, place them upright so
that any water that may have got in can drain
out.
• Do not immerse the blender and lids in water, as
the lubrication on the bearings may be washed
away over time.
• Lids and motor unit aren’t suitable for dishwasher
2. Wash the containers and whisk in warm soapy
water.
All removable parts can be washed in warm soapy
water and then carefully rinsed and dried. If necessary,
use a nylon-bristle brush to complete the cup cleaning
operation.
3. Wipe the motor unit with a damp cloth.
4. The non-slip base on the bottom of the bowl can
be removed and cleaned. Make sure it is re-
placed correctly before using it again.
5. Dry all detachable parts thoroughly.
TIP
For quick cleaning between processing tasks, fill the
chopper or food processor bowl with water halfway,
assemble the chopper blade into the bowl and the
motor unit onto the lid according to the description in
the operation section and start chopping function for
a few seconds.