6
GB
Standby mode
This washing machine, in compliance with new energy saving
regulations, is fitted with an automatic standby system which
is enabled after about 30 minutes if no activity is detected.
Press the ON-OFF button briefly and wait for the machine to
start up again.
Indicator lights
The indicator lights provide important information.
This is what they can tell you:
Wash cycle phase indicator lights
As the WASH CYCLE knob is rotated, the indicator lights
illuminate, indicating the stages which will be performed by
the machine in accordance with the selected wash cycle.
Once the desired wash cycle has been selected and has be-
gun, the indicator lights switch on one by one to indicate which
phase of the cycle is currently in progress.
Function buttons and corresponding indicator lights
When a function is selected, the corresponding indicator
light will illuminate. If the selected function is not compa-
tible with the programmed wash cycle, the corresponding
indicator light will flash, a sound signal will be emitted and
the function will not be activated. If a function which is in-
compatible with another function selected previously, only
the most recent selection will remain active.
Wash
Rinse
Spin
Drain
End of wash cycle
Description of the washing
machine and starting a wash cycle
TEMPERATURE
button
WASH CYCLE
PROGRESS
FUNCTION
buttons with
indicator lights
ON/OFF
button with indicator light
SPIN
SPEED
button
LID LOCKED
indicator light
START/PAUSE
button with indicator light
Control panel
WASH CYCLE
knob
DISPLAY
CONTROL PANEL LOCK
button with indicator light
ON/OFF
button with indicator light: switches the machine
on and off. If the indicator light is illuminated, this indicates
that the machine is switched on.
WASH CYCLE
knob: programmes the wash cycles. During
the wash cycle, the knob does not move.
SPIN SPEED
button: sets the spin speed or exclude the
spin cycle completely (
see “Personalisation”
).
TEMPERATURE
button: sets the temperature or the cold
wash cycle (
see “Personalisation”
).
DISPLAY:
indicates the time remaining for the selected
wash cycle and, if a delayed start has been programmed,
the time remaining until the start of the wash cycle.
CONTROL PANEL LOCK
button with indicator light:
activates or deactivates the control panel lock.
FUNCTION
buttons with indicator light
:
used to select the
available functions. The indicator light corresponding to the
selected function will remain lit.
WASH CYCLE PROGRESS
indicator lights:
used to
monitor the progress of the wash cycle. The illuminated
indicator light shows which phase is in progress.
DOOR LOCKED
indicator light: indicates whether the
door may be opened or not
(see next page)
.
START/PAUSE
button with indicator light: starts or tem-
porarily interrupts the wash cycles.
N.B.
To pause the wash cycle in progress, press this
button; the corresponding indicator light will flash orange,
while the indicator light for the current wash cycle phase
will remain lit in a fixed manner. If the DOOR LOCKED
indicator light is switched off, the door may be opened.To
start the wash cycle from the point at which it was inter-
rupted, press this button again.
