Hotpoint Ariston CM 5038 IX H, Instructions For Use Manual, Page: 14 / 16

14
Problem Possible cause Solution
n
o espresso CoFFee is delivered
ɳ
No water in the tank.
ɳ
The holes in the filter
holder spouts are
blocked.
ɳ
The espresso boiler
outlet is blocked.
ɳ
The filter is blocked.
ɳ
The tank is incorrectly
inserted.
ɳ
Fill the tank with water.
ɳ
Clean the spout holes.
ɳ
Clean as described in the
chapter “Cleaning the
boiler outlet”.
ɳ
Clean as described in the
section “cleaning the filter
holder”.
ɳ
Insert tank correctly.
t
he espresso CoFFee drips
from
the edges of the filter holder
rather than the holes.
ɳ
The filter holder is
inserted incorrectly.
ɳ
The espresso boiler
gasket has lost elasticity.
ɳ
The holes in the filter
holder spouts.
ɳ
Attach the filter holder
correctly and rotate firmly
as far as it will go.
ɳ
Have the espresso boiler
gasket elasticity replaced
at a service centre.
ɳ
Clean the spout holes.
t
he espresso CoFFee is Cold
ɳ
The espresso OK
indicator light was not
on when the coffe switch
was pressed.
ɳ
No preheating
performed.
ɳ
The cups were not
preheated.
ɳ
Wait until the OK light
comes on not on when the
coffee switch was pressed.
ɳ
Preheat as described in
the paragraph “Preheating
the appliance”.
ɳ
Preheat the cups by
rinsing them in hot water.
t
he pump is exCessively noisy
ɳ
The water tank is empty.
ɳ
The tank is incorrectly
inserted.
ɳ
Fill tank.
ɳ
Insert tank correctly.