Hotpoint Ariston CM 5038 IX H Instructions For Use Manual Download Page 10

10

1. p

repare

 

the

 

espresso

 

CoFFees

 as described in the 

previous paragraphs, using sufficiently large 
cups. 

2. p

ress

 

the

 

steam

 

button

 and 

wait for the OK light to come on. 
This indicates that the boiler has 
reached the ideal temperature 
for steam production. 

3. i

n

 

the

 

meantime

,

 fill a recipient 

with about 100 grams of milk 
for each cappuccino to be 
prepared. The milk must be at 
refrigerator temperature (not 
hot!). In choosing the size of the 
recipient, bear in mind that the milk doubles or 
triples in volume. 

n

ote

:

 you are recommended to use 

semiskimmed milk at refrigerator 
temperature. 

4. p

laCe

 

the

 

reCipient

 containing the milk 

under the cappuccino maker. 

5. d

ip

 

the

 

CappuCCino

 

maker

 into the 

milk for about 5 mm and turn 
the steam knob anticlockwise, 
taking care not to immerse the 
raised line on the cappuccino 
maker (indicated by the arrow).  
Turn the steam knob at least a half turn 
anticlockwise. Steam is discharged from the 
cappuccino maker, giving the milk a creamy 
frothy appearance. To obtain a creamier froth, 
dip the cappuccino maker into the milk and 
rotate the container with slow movements from 
the bottom upwards.

6. w

hen

 

the

 

required

 

temperature

 

is

 

reaChed

 (60°C is ideal), 

interrupt steam delivery by 
rotating the steam knob 
clockwise and at the same time 
pressing the steam 
button. 

7. p

our

 

the

 

Frothed

 

milk

 into the cups containing 

the espresso coffee prepared previously. The 
cappuccino is ready. Sweeten to taste and, if 
desired, sprinkle the froth with a little cocoa 
powder. 

n

ote

:

 To prepare more than one cappuccino, 

first make all the coffees then at the end prepare 
the frothed milk for all the cappuccinos. 

n

ote

:

 to make coffee again after the milk has 

been frothed, cool down the boiler first or the 
coffee will be burnt. To cool it, place a container 
under the boiler outlet, press the steam button 
and run off water until the OK light goes out. 
Make the coffee as described in the previous 
paragraphs. 

HOW TO MAKE CAPPUCCINO COFFEE 

Summary of Contents for CM 5038 IX H

















Reviews: