18
GB
Using the display
Setting the temperature
If the compartment concerned is switched off, the word
OFF will appear on the relative indication space on the
display (REFRIGERATOR COMPARTMENT
setting and
FREEZER COMPARTMENT
setting). If the compartment
is switched on, then the temperatures set at that time
will appear. To change them, turn the relative knob
directly (REFRIGERATOR OPERATION Knob and
FREEZER OPERATION and APPLIANCE ON/OFF
Knob).
The refrigerator compartment can be set to between
+2°C and +8°C, while the freezer compartment can
be set to a temperature of between -18°C and -26°C.
The temperature in both cases can be increased or
decreased by 1°C at a time.
When the HOLIDAY function is enabled, temperature
regulations cannot be made, but the appliance
automatically sets itself to the best setting for the
situation: +12°C for the refrigerator compartment (if
enabled) and -18°C for the freezer compartment.
Function status
Function symbol during normal operation
Function selected (outline flashing)
Function enabled (outline on)
Enabling/disabling the functions
Press the MODE button as many times as necessary
for the red outline of the function you wish to act on to
light up: this indicates that the function has been
selected and is ready to be enabled or disabled. Now
you can enable or disable the selected function using
the SELECT button.
!
If you do not confirm your selection by pressing the
SELECT button within five seconds of the last action
performed on the display, the latter shall go back to
displaying the function previously set and indicate that
no new modification has been made.
The SUPER COOL function is linked to the refrigerator
compartment and when the latter is switched off, no
action whatsoever will be possible on the former, other
functions foresee an operation that can create conflicts
(for example, when the HOLIDAY and SUPER FREEZE
functions are enabled simultaneously), in this case a pre-
set priority is taken into consideration in order to help
you operate the appliance.
!
The SUPER FREEZE function features a double
mode of operation (see paragraph on operating the
freezer compartment).
Enabling/disabling the DEMO mode:
To run a demonstration of the display operation while
keeping the appliance turned off, just enable the
DEMO mode.
Enabling:
- set the FREEZER OPERATION and APPLIANCE ON/
OFF
Knob to 0ff;
- keep the two buttons Select and Mode pressed
for approximately 5 seconds, until you hear the buzzer
and the two words OFF and OFF flash on the
display; these words will flash for the entire duration
the DEMO mode is enabled.
Disabling:
- set the FREEZER OPERATION and APPLIANCE ON/
OFF
Knob to 0ff;
- keep the two buttons Select and Mode pressed
for approximately 5 seconds, until you hear the buzzer
and the two words OFF and OFF on the display
stop flashing.
Holiday function
To minimise energy usage when on holiday, it is not
necessary to switch the appliance off. The appliance
has a function which allows it to maintain the
temperature of the refrigerator compartment at
approximately 15°C (which can also be used to
conserve make-up and beauty products). The freezer
temperature must be set to the minimum value in order
to preserve the food.
Using the refrigerator to its full potential
Use the REFRIGERATOR OPERATION knob to
adjust the temperature (
see Description
).
Activate the SUPER COOL function to lower the
temperature quickly. For example, when you place a
large number of new food items inside a fridge, the
internal temperature will rise slightly. The function
quickly cools the groceries by temporarily reducing
the temperature until it reaches the ideal level.
Place only cold or lukewarm foods in the compartment,
not hot foods (
see Precautions and tips
).
Remember that cooked foods do not last longer than
raw foods.
Do not store liquids in open containers. They will
increase humidity in the refrigerator and cause
condensation to form.
Downloaded from Fridge-Manual.com Manuals
