Hotpod RB755, Use And Care Manual

Page: 12 / 36

OVEN CONTROL, CLOCK AND TIMER
Automatic Clock To Set the Clock To Reset the Clock
The clock must be set for the
automatic oven timing functions to
work properly. The time of day
cannot be changed during a Timed
Baking or Self Cleaning cycle. 1. Press the CLOCK pad,
the display will flash.
2. Press the HOUR and MIN. pads
to set the correct time of day.
3. Press the CLOCK pad for an
immediate start.
1. Press the CLOCK pad, the display
will be blank. Press the CLOCK
pad again, the display will flash.
2. Press the HOUR and MIN. pads
to set the correct time of day.
3. Press the CLOCK pad again for
an immediate start.
CLOCK
To Blank Out the Clock Timer To Set the Timer
If you have several clocks in your
kitchen, you may wish to blank the
time of day display of your range.
If so, press the CLOCK pad.
Although you cannot see it, the
clock maintains the correct time of
day. It will reappear for the
duration of any function that
displays a Start Time or Cook
Time. Press the CLOCK pad again
to bring back the display. The timer is a minute timer and
does not control oven operations.
The maximum setting on the timer
is 11 hours and 59 minutes. 1. Press the TIMER
ON/OFF pad.
2. Press the HOUR and MIN. pads
until the amount of time you
want shows in the display. The
timer will start automatically
within a few seconds of
releasing the pad.
When the countdown is finished
the control will beep until the
TIMER ON/OFF pad is pressed.
TIMER
ON/OFF
To Reset the Timer To Cancel the Timer
If the display is still showing the time remaining, you
may change it by pressing the HOUR and MIN. pads
until the time you want appears in the display.
If the remaining time is not in the display, recall the
remaining time by pressing the TIMER ON/OFF pad
and then pressing the HOUR and MIN. pads until the
new time you want shows on the display. To cancel the timer, the remaining time must be in
the display. To recall the time remaining, press the
TIMER ON/OFF pad once. To cancel the timer press
the TIMER ON/OFF pad again.
Power Outage Oven Temperature Knob
When the power is restored the display will flash “PF”
for Power Failure until a pad is pressed or the knob is
turned. Reset the clock to the correct time of day.
If your oven was set for a timed oven operation
when the power outage occurred, the clock and all
programmed functions must be reset. To reset them,
first turn the Oven Temperature knob back to OFF,
reset the clock, functions and knob back to the way
they were before the power outage. The oven temperature
knob maintains the
temperature from
WARM to 550°F.
It also has an OFF,
BROIL and an AUTO
SELF CLEAN
setting.
The PREHEATED light glows when the oven
reaches your selected temperature.
The OVEN ON light will glow any time the Oven
Temperature knob is not in the OFF position and is
set on a temperature or a function.
PREHEATED
OVEN ON
200
BROIL
OFF
LATCH
DOOR
250
350
300
450
500
AUTO
SELF
CLEAN
550
400
WM
12