2
HH18Bi 22/04/13
List of Components
1.
Component Identification and Installation
Your Hothouse Stove is shipped securely packed and strapped. Carefully remove any straps and
remove all wood, cardboard and any plastic packaging, open the door and remove all the contents.
See List of Components section and check contents carefully.
To remove the lower baffle plate, carefully lift it off the two back brackets and remove through the front
door. Access can now be gained the upper baffle which can be removed in a similar manner.
Note the
orientation of both baffles before removal.
Access to the chimney through the front door of the stove is
now possible.
Now proceed to install the stove according to these instructions and current installation standards or HETAS
advice. The internal parts of the stove can be re-assembled as the reverse of the previous removal
instructions.
Fig 2 – Insert Boiler Stove Assembly and controls
Description of Parts
Qty
Stove Assembly
1
Tool
1
Ash Pan
1
Thermostat Knob
1
Stove Operating Glove
1
Touch up paint
1
Installation & Operating Instructions
1
Warranty Card
1
Fig 1 – Stove Tool
Slot to Operate
Riddle Grate
Lift ashpan with
This end
Use this end to operate
Secondary air control
